Stand out from thousands of candidates, earn the employer's regard, qualify for promotion — passing the GB0-191-ENU exam starts it. Real4Prep is your best partner: 434 practice questions for the GB0-191-ENU exam.
H3C GB0-191-ENU Exam Overview:
| Certification Vendor: | H3C |
|---|---|
| Exam Name: | Constructing Small - and Medium - Sized Enterprise Network |
| Exam Number: | GB0-191-ENU |
| Available Languages: | Simplified Chinese, English |
| Certificate Validity Period: | 3 years |
| Passing Score: | 600/1000 |
| Exam Duration: | 60 minutes |
| Exam Format: | Fill-in-the-blank, Single-choice, Multiple-choice, True/False |
| Real Exam Qty: | 50-52 |
| Exam Price: | USD 100-165 |
| Related Certifications: | H3C Certified Expert (H3CE) H3C Certified Senior Engineer (H3CSE) |
| Recommended Training: | Constructing Small and Medium-Sized Enterprise Network V7.1 |
| Exam Registration: | Pearson VUE Registration H3C Official Certification Portal |
| Sample Questions: | ![]() |
| Exam Way: | Computer-based test at authorized H3C test centers and Pearson VUE |
| Pre Condition: | No formal prerequisite required; basic knowledge of computer networks recommended |
| Official Syllabus URL: | https://www.h3c.com/en/Support/Training_Certification/H3CNE/ |
H3C GB0-191-ENU Exam Syllabus Topics:
| Section | Weight | Objectives |
|---|---|---|
| H3C Device Basics | 15% | - Basic configuration and management - Remote access and system maintenance - Command line interface and file system |
| WAN and Interconnection | 10% | - VPN and basic WLAN concepts - Common WAN access technologies - Network fault diagnosis |
| IP Routing Technologies | 20% | - Introduction to OSPF basics - Static routing and default route - RIP protocol fundamentals and configuration |
| Network Services and Security | 15% | - Port security and device hardening - DHCP and DNS services - ACL and NAT configuration |
| Computer Network Fundamentals | 20% | - Common network interfaces and cables - TCP/IP protocol suite and subnetting - OSI and TCP/IP models |
| LAN Switching Technologies | 20% | - Ethernet principles and VLAN - VLAN trunking and link aggregation - Spanning Tree Protocol |
GB0-191-ENU Exam FAQ — Stand Out
Yes:
After any course, reinforce it with the 434 practice questions for the H3C Constructing Small - and Medium - Sized Enterprise Network — every answer expert-verified.
The H3C Constructing Small - and Medium - Sized Enterprise Network blueprint spans 6 domains — including H3C Device Basics (15%), LAN Switching Technologies (20%), Computer Network Fundamentals (20%). Know your strength and shortcoming per domain; the complete outline above lists every subtopic.
60 minutes for 50-52 questions. The Real4Prep test engine simulates the actual test's atmosphere, so you get used to real conditions in advance.
Yes — download the free trial of the H3C Constructing Small - and Medium - Sized Enterprise Network study materials before you buy and judge the profession and accuracy yourself. Purchases include 365 days of free updates, sent automatically and immediately by email; renew afterward at 50% off.
USD 100-165 per attempt, 600/1000 to pass. A failed attempt is a loss of time and money — prepare steadily with the 434 practice questions for the GB0-191-ENU exam at Real4Prep.
Through the vendor's official registration channels:
The H3C Constructing Small - and Medium - Sized Enterprise Network is delivered Computer-based test at authorized H3C test centers and Pearson VUE — pick the arrangement that suits you when booking.
The H3C Constructing Small - and Medium - Sized Enterprise Network is H3C's certification exam for H3C Certified Network Engineer (H3CNE), at the Associate level. Passing it is a new start — toward better salary, decent work, and promotion chances. Related credentials include H3C Certified Senior Engineer (H3CSE), H3C Certified Expert (H3CE).
No formal prerequisite required; basic knowledge of computer networks recommended Eligibility rules change over time, so verify the current requirements on the official page (official GB0-191-ENU exam page) before registering.
Upon successful payment, our system emails the H3C Constructing Small - and Medium - Sized Enterprise Network test braindump automatically within about a minute — credit card payment accepted, with 24/7 help if nothing arrives within 2 hours. If you fail the corresponding GB0-191-ENU exam within 60 days of purchase, scan your exam transcripts and email them as attachments within 2 days of the exam — together with a scanned enrollment slip and the official Score Report PDF — and after confirmation we refund the full amount within 7 days. Excluded: exams within 3 days of purchase, candidate names that don't match the payer, and free or expired products. Or exchange for two equal-value products free.
H3C Constructing Small - and Medium - Sized Enterprise Network Sample Questions:
The IP address 10.0.10.63 and the mask 255.255.255.224 represent a ______.
- A. Broadcast address
- B. host address
- C. Network address
- D. None of the above
Correct Answer: A 🗳️
The three MSR routers are connected as shown in the figure. 192.168.1.0/30 is the interconnection network segment between RTA and RTB, and 10.10.10.0/30 is the interconnection network segment between RTB and RTC.
OSPF is running on the interconnection interfaces of the three routers and all belong to Area 0. At the same time, only the three router interconnection interface network segments are published in Area 0.
Assuming that OSPF is operating normally and OSPF neighbors are established successfully, then ______. (Multiple choice)
- A. If the links between the three routers are all Ethernet, there may only be one DR in the network
- B. There is no OSPF route in the RTB routing table
- C. After the OSPF neighbor status of the three routers is stable, the three routers have the same LSDB
- D. If the links between the three routers are all Ethernet, then there are at least two DRs in the network
Correct Answer: B,C,D 🗳️
A network environment looks like:
HostA----GE0/0--MSR-1--S1/0-----Frame Relay----S1/0--MSR-2--GE0/0----HostB
Among them, two routers MSR-1 and MSR-2 connect to the frame relay network through S1/0 respectively. Configure IP addresses 3.3.3.1/24 and DLCI 31 on the S1/0 interface of MSR-1, and configure IP addresses 3.3.3.2/24 and DLCI 82 on the S1/0 interface of MSR-2. The physical connection is completely normal, and the other default configurations are the same.
So which of the following statements are wrong? (multiple choice)
- A. After configuring the command ip address negotiate on the S1/0 interface of MSR-1, it can dynamically obtain the address from MSR-2.
- B. On a frame relay network, the corresponding relationship between DLCI 31 connected to MSR-1 and DLCI 82 connected to MSR-2 must be correctly configured, so that the S1/0 interfaces of the two routers can communicate with each other.
- C. In the frame relay network exchange process, the source DLCI is always 31, and the destination DLCI will change. Until the last hop, the destination DLCI becomes 82.
- D. On a frame relay network, DLCI 31 can identify MSR-1, and DLCI 82 can identify MSR-2.
Correct Answer: A,C,D 🗳️
The network delay (delay) defines the time required for the network to transmit data from one network node to another network node. Network latency includes ______. (Multiple choice)
- A. switching delay (switching delay)
- B. propagation delay (propagation delay)
- C. queuing delay
- D. media access delay (access delay)
Correct Answer: A,B 🗳️
A company purchased switches from two manufacturers, A and B, for network engineering implementation. Need to use link aggregation technology between the switches of the two vendors. After consulting the relevant documents, it is found that the switch of manufacturer A does not support the LACP protocol.
In this case, which of the following configuration methods are reasonable? (multiple choice)
- A. One party configures static aggregation, and one party configures dynamic aggregation
- B. Both parties configure dynamic aggregation
- C. Both parties configure static aggregation
- D. Unable to use link aggregation
- E. One party configures static aggregation, and one party configures dynamic aggregation
Correct Answer: C 🗳️
Viewing page 1 out of 87 pages.
Viewing questions 1-5 out of 434 questions.



