100% Accurate Answers! Jun-2024 300-410 Actual Real Exam Questions
Best Value Available! 2024 Realistic Verified Free 300-410 Exam Questions
What Does a Cisco Certified Entry Network Technician (CCENT) Do?
Explanation of these topics include configuration, cabling, patching, troubleshooting and security. Reach out to the global world and expand your business by achieving your goal. Explanation of concepts such as IP addressing, subnets, default gateway and routing are part of this Cisco certification. Learn the latest Cisco certification with the help of Cisco 300-410 exam dumps. Reach out to the global world by filling in the knowledge gap in the IT industry.
How do you start to study for the Cisco Certified Specialist - Enterprise Advanced Infrastructure Implementation (300-410 ENARSI) Exam
Get the guide For Cisco Certified Specialist - Enterprise Advanced Infrastructure Implementation (300-410) Exam
Quick study guide if you don't have time to read complete the page
The Cisco 300-410 exam is considered to be one of the most difficult Cisco certification exams, but it is also one of the most rewarding. Passing this certification will validate your skills in managing networks with limited resources and will help you land a better job or get further in your current profession. It is never easy for a new IT graduate to find a job. They still need to work hard and complete their certification to get the job they want. The Cisco Certified Entry Network Technician (CCENT) is designed for people who already possess an understanding of networking and basic network infrastructures, such as switches, routers, and wireless networks. This certification allows you to qualify for jobs in network support and consulting positions. Cisco 300-410 Dumps is prepared by experts with 100% simulation questions and answers related to the actual exam. The qualified person may install, operate and troubleshoot a small enterprise network, including basic network security.
NEW QUESTION # 51
Refer to the exhibit.
A network administrator reviews the branch router console log to troubleshoot the OSPF adjacency issue with the DR router. Which action resolves this issue?
- A. Configure matching hello and dead intervals between sites.
- B. Configure the WAN interface for DR site in the related OSPF area.
- C. Advertise the branch WAN interface matching subnet for the DR site.
- D. Stabilize the DR site flapping link to establish OSPF adjacency.
Answer: A
NEW QUESTION # 52
Refer to the exhibit.
The R1 and R2 configurations are:
The neighbor is not coming up. Which two sets of configurations bring the neighbors up? (Choose two.)
- A. R2
ip route 10.1.1.1 255.255.255.255 192.168.1.1
router bgp 200
neighbor 10.1.1.1 disable-connected-check
neighbor 10.1.1.1 update-source loopback 0 - B. R2
ip route 10.1.1.2 255.255.255.255 192.168.1.2
router bgp 100neighbor 10.1.1.2 ttl-security hops 1
neighbor 10.1.1.2 update-source loopback 0 - C. R1
ip route 10.1.1.2 255.255.255.255 192.168.1.2
router bgp 100
neighbor 10.1.1.2 disable-connected-check
neighbor 10.1.1.2 update-source Loopback0 - D. R2
ip route 10.1.1.1 255.255.255.255 192.168.1.1
router bgp 200
neighbor 10.1.1.1 tti-security hops 1
neighbor 10.1.1.1 update-source loopback 0 - E. R1
ip route 10.1.1.2 255.255.255.255 192.168.1.2
router bgp 100
neighbor 10.1.1.1 ttl-security hops 1
neighbor 10.1.1.2 update-source loopback 0
Answer: A,C
Explanation:
NEW QUESTION # 53
Refer to the exhibit.
During troubleshooting it was discovered that the device is not reachable using a secure web browser. What is needed to fix the problem?
- A. permit tcp port 443
- B. permit tcp port 22
- C. permit udp port 465
- D. permit tcp port 465
Answer: A
NEW QUESTION # 54 
Refer to the exhibit. Which subnet is redistributed from EIGRP to OSPF routing protocols?
- A. 10.2.3.0/26
- B. 10.2.2.0/24
- C. 10.1.4.0/26
- D. 10.1.2.0/24
Answer: B
Explanation:
Section: Layer 3 Technologies
NEW QUESTION # 55
An engineer configured the wrong default gateway for the Cisco DNA Center enterprise interface during the install. Which command must the engineer run to correct the configuration?
- A. sudo maglev-config update
- B. sudo maglev reinstall
- C. sudo maglev install config update
- D. sudo update config install
Answer: A
NEW QUESTION # 56
Drag and drop the MPLS VPN device types from the left onto the definitions on the right.
Answer:
Explanation:
Explanation
Graphical user interface, application Description automatically generated
NEW QUESTION # 57 
Refer to the exhibit. After recovering from a power failure. Ethernet0/1 stayed down while Ethernet0/0 returned to the up/up state The default route through ISP1 was not reinstated m the routing table until Ethernet0/1 also came up Which action resolves the issue?
- A. Remove the references to the interface names from both static default routes
- B. Add a static route to the 8 8.8 8/32 destination through the next hop 203.0.113.1
- C. Reference the track object 1 in both static default routes
- D. Configure the default route through ISP1 with a higher administrative distance than 2.
Answer: B
NEW QUESTION # 58 
Refer to the exhibit. The traffic from spoke to hub is dropping. The operations team observes:
* R2-R3 link is down due to the fiber cut.
* R2 and R5 receive traffic from R1 in AS 65101.
* R3 and R5 receive traffic from R4 in AS 65201.
Which configuration resolves the issue?
- A.
- B.
- C.
- D.
Answer: B
NEW QUESTION # 59
Drag and drop the LDP features from the left onto the descriptions on the right
Answer:
Explanation:
Explanation
Diagram Description automatically generated
The MPLS LDP Inbound Label Binding Filtering feature can be used to control the amount of memory used to store Label Distribution Protocol (LDP) label bindings advertised by other devices. For example, in a simple Multiprotocol Label Switching (MPLS) Virtual Private Network (VPN) environment, the VPN provider edge (PE) devices might require label switched paths (LSPs) only to their peer PE devices (that is, they do not need LSPs to core devices). Inbound label binding filtering enables a PE device to accept labels only from other PE devices.
NEW QUESTION # 60 
Refer to the exhibit. R2 has two paths to reach 192.168.13.0/24. but traffic is sent only through R3. Which action allows traffic to use both paths?
- A. Configure the delay 1 command under interface FastEthernet0/0 on R2.
- B. Configure the variance 2 command under the EIGRP process on R2
- C. Configure the bandwidth 2000 command under interface FastEthernet0/0 on R2.
- D. Configure the variance 4 command under the EIGRP process on R2.
Answer: D
Explanation:
Explanation
From the output of the "show ip eigrp topology ..." command, we notice network 192.168.13.0/24 was learned via two routes:+ From 192.168.23.3 (R3) with FD = 1075200 and AD = 281600+ From 192.168.12.1 (R1) with FD = 2611200 and AD = 281600 From the output of the "show ip route ..." command, we learned that the best (and chosen) path is via
192.168.23.3 (R3).
To use both paths (called unequal cost load balancing) with EIGRP, the second path via R1 must satisfy the feasibility condition. The feasibility condition states that, theAdvertised Distance (AD) of a route must be lower than the feasible distance of the current successor route.
In this case, the second path satisfies the feasible condition as its AD (281600) is smaller than the FD (1075200) of the best path. Therefore we can configure loadbalancing with "variance" command.
In other words, EIGRP will install all paths with metric < variance * best_metric into the local routing table, provided that it meets the feasibility condition to preventrouting loop. Therefore we can calculate the variance
> metric / best_metric = 2611200 / 1075200 =2.4.
So with a variance greater than 2 (and must be an integer), we can load balance traffic to network
192.168.13.0/24.
NEW QUESTION # 61 
Refer to the exhibit. Why is the remote NetFlow server failing to receive the NetFlow data?
- A. The flow exporter is configured but is not used.
- B. The flow monitor is applied in the wrong direction.
- C. The destination of the flow exporter is not reachable.
- D. The flow monitor is applied to the wrong interface.
Answer: C
Explanation:
Section: Infrastructure Services
Explanation/Reference:
NEW QUESTION # 62
A newly installed spoke router is configured for DMVPN with the ip mtu 1400 command. Which configuration allows the spoke to use fragmentation with the maximum negotiated TCP MTU over GRE?
- A. ip tcp adjust-mss 1360
crypto ipsec fragmentation mtu-discovery - B. ip tcp adjust-mtu 1360
crypto ipsec fragmentation mtu-discovery - C. ip tcp adjust-mss 1360
crypto ipsec fragmentation after-encryption - D. ip tcp adjust-mtu 1360
crypto ipsec fragmentation after-encryption
Answer: C
Explanation:
https://www.cisco.com/c/en/us/support/docs/security/dynamic-multipoint-vpn-dmvpn/111976-dmvpn-troublesho
NEW QUESTION # 63 
Refer to the exhibit A network engineer notices that R1 and R2 cannot establish an eBGP peering. The following messages appear in the log:
Which configuration must the engineer apply to R1 to restore the eBGP peering?
- A.
- B.
- C.
- D.
Answer: D
NEW QUESTION # 64
A network administrator is tasked to permit http and https traffic only toward the internet from the User1 laptop to adhere to company's security policy. The administrator can still ping to www.cisco.com Which interface should the access list 101 be applied to resolve this issue?
- A. Interface G0/48 in the incoming direction
- B. Interface G0/0 in the incoming direction.
- C. Interface S1/0 in the outgoing direction.
- D. Interface G0/0 in the outgoing direction.
Answer: B
NEW QUESTION # 65
Refer to the exhibit.
The R2 loopback interface is advertised with RIP and EIGRP using default values. Which configuration changes make R1 reach the R2 loopback using RIP?
- A. R1(config)# router eigrp 1
R1(config-router)# distance eigrp 120 120 - B. R1(config)# router rip
R1(config-router)# distance 90 - C. R1(config)# router eigrp 1
R1(config-router)# distance eigrp 130 120 - D. R1(config)# router rip
R1(config-router)# distance 100
Answer: C
Explanation:
distance (AD Number u want to change to) (neighbor IP) (Wildcard Mask) (access-list number)
NEW QUESTION # 66
A network administrator performed a Compact Flash Memory upgrade on a Cisco Catalyst 6509 Switch.
Everything is functioning normally except SNMP, which was configured to monitor the bandwidth of key interfaces but the interface indexes are changed. Which global configuration resolves the issue?
- A. snmp-server ifindex permanent
- B. snmp ifindex permanent
- C. snmp-server ifindex persist
- D. snmp ifindex persist
Answer: C
Explanation:
Explanation
The SNMP ifIndex persistence feature provides an interface index (ifIndex) value that is retained and used when the router reboots. The ifIndex value is a unique identifying number associated with a physical or logical interface. In the following example, SNMP ifIndex persistence is enabled for all interfaces:
router(config)# snmp-server ifindex persist
NEW QUESTION # 67
Refer to Exhibit.
The network administrator configured the branch router for IPv6 on the E0/0 interface. The neighboring router is fully configured to meet requirements, but the neighbor relationship is not coming up. Which action fixes the problem on the branch router to bring the IPv6 neighbors up?
- A. Enable the IPv4 address family under the E0/0 interface by using the address-family ipv4 unicast command
- B. Disable IPv6 on the E0/0 interface using the no ipv6 enable command
- C. Enable the IPv4 address family under the router ospfv3 4 process by using the address-family ipv4 unicast command
- D. Disable OSPF for IPv4 using the no ospfv3 4 area 0 ipv4 command under the E0/0 interface
Answer: C
Explanation:
Once again, Cisco changed the IOS configuration commands required for OSPFv3 configuration. The new OSPFv3 configuration uses the "ospfv3" keyword instead of the earlier "ipv6 router ospf" routing process command and "ipv6 ospf" interface commands.
The Open Shortest Path First version 3 (OSPFv3) address families feature enables both IPv4 and IPv6 unicast traffic to be supported. With this feature, users may have two processes per interface, but only one process per address family (AF).
NEW QUESTION # 68
Refer to the exhibit.
Users report that IP addresses cannot be acquired from the DHCP server. The DHCP server is configured as shown. About 300 total nonconcurrent users are using this DHCP server, but none of them are active for more than two hours per day. Which action fixes the issue within the current resources?
- A. Configure the DHCP lease time to a smaller value
- B. Add the network 192.168.2.0 255.255.255.0 command to the DHCP pool
- C. Modify the subnet mask to the network 192.168.1.0 255.255.254.0 command in the DHCP pool
- D. Configure the DHCP lease time to a bigger value
Answer: D
NEW QUESTION # 69
Refer to the exhibit.
An engineer must configure DMVPN Phase 3 hub-and-spoke topology to enable a spoke-to-spoke tunnel. Which NHRP configuration meets the requirement on R6?
- A. Option A
- B. Option C
- C. Option D
- D. Option B
Answer: D
NEW QUESTION # 70
Drag and drop the OSPF adjacency states from the left onto the correct descriptions on the right.
Answer:
Explanation:
NEW QUESTION # 71
Refer to the exhibit. After applying IPsec, the engineer observed that the DMVPN tunnel went down, and both spoke-to-spoke and hub were not establishing.
Which two actions resolve the issue? (Choose two.)
- A. Configure the crypto isakmp key cisco address 192.1.1.1 on R2 and R3.
- B. Configure the crypto isakmp key cisco address 0.0.0.0 on R2 and R3.
- C. Change the mode from mode tunnel to mode transport on R3.
- D. Remove the crypto isakmp key cisco address 10.1.1.1 on R2 and R3.
- E. Change the mode from mode transport to mode tunnel on R2.
Answer: B,C
Explanation:
Section: VPN Technologies
NEW QUESTION # 72
An engineer needs dynamic routing between two routers and is unable to establish OSPF adjacency. The output of the show ip ospf neighbor command shows that the neighbor state is EXSTART/EXCHANGE.
Which action should be taken to resolve this issue?
- A. match the passwords
- B. match the MTUs
- C. match the network types
- D. match the hello timers
Answer: B
Explanation:
NEW QUESTION # 73
Drag and drop the packet types from the left onto the correct descriptions on the right.
Answer:
Explanation:
NEW QUESTION # 74
A DMVPN single hub topology is using IPsec + mGRE with OSPF. What should be configured on the hub to ensure it will be the designated router?
- A. route map to set the metrics of learned routes to 110
- B. OSPF priority greater than 1
- C. OSPF priority to 0
- D. tunnel interface of the hub with ip nhrp ospf dr
Answer: B
Explanation:
By default, the priority is 1 on all routers so we can set the OSPF priority of the hub to a value which is greater than 1 to make sure it would become the DR.
NEW QUESTION # 75
Refer to the exhibit.
An engineer configured NetFlow on R1, but the NMS server cannot see the flow from ethernet 0/0 of R1. Which configuration resolves the issue?
- A. flow monitor Flowmonitor1
source Ethernet0/0 - B. flow exporter FlowAnalyzer1
source Ethernet0/0 - C. interface Ethernet0/0
ip flow monitor Flowmonitor1 input
ip flow monitor Flowmonitor1 output - D. interface Ethernet0/1
ip flow monitor Flowmonitor1 input
ip flow monitor Flowmonitor1 output
Answer: C
NEW QUESTION # 76
......
Actual Questions Answers Pass With Real 300-410 Exam Dumps: https://www.real4prep.com/300-410-exam.html
Pass Your Exam Easily! 300-410 Real Question Answers Updated: https://drive.google.com/open?id=1vG5bg5VNnvszTUB1Q-ttOor4EAv5I4qb