67 Q&As in UPDATED NS0-521 Exam Questions Certification Test Engine to PDF
Get The Important Preparation Guide With NS0-521 Dumps
Network Appliance NS0-521 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
NEW QUESTION # 21
During maintenance of A NetApp AFF ONTAP cluster, which two steps are needed to move the SAN UFs to new nodes that are members of a portset? (Choose two.)
- A. Remove the LIF from the portset.
- B. Disable the zoning of the LIF WWPN.
- C. Take the SAN LIF offline.
- D. Disable the SLM feature for the node that hosts the LIF.
Answer: A,C
Explanation:
To move SAN LIFs to new nodes that are members of a portset during maintenance of a NetApp AFF ONTAP cluster, you should take the following steps:
* Remove the LIF from the portset: This ensures that the LIF is no longer associated with the current node, preparing it for the move to the new node.
* Take the SAN LIF offline: This step is necessary to make configuration changes without causing disruption to the SAN hosts. Once offline, the LIF can be moved to the new node and reconfigured as needed.
These actions help maintain the integrity and performance of the SAN environment during the migration of LIFs.
For more details, see:
* NetApp Documentation on Moving SAN LIFs
* NetApp Community on Moving LIFs
NEW QUESTION # 22
An administrator is planning a SAN implementation and needs to validate that the ESXI host and NetApp ONTAP software releases are supported.
Which tool is used to accomplish this?
- A. Broadcom SAN Health
- B. NetApp Active IQ Config Advisor
- C. NetApp Hardware Universe
- D. NetApp Interoperabilty Matrix Tool
Answer: D
Explanation:
To validate that the ESXi host and NetApp ONTAP software releases are supported, theNetApp Interoperability Matrix Tool (IMT)should be used. The IMT provides comprehensive compatibility information, ensuring that all components of the SAN environment will work together seamlessly.
For further details, refer to:
* NetApp Interoperability Matrix Tool
NEW QUESTION # 23
During maintenance of A NetApp AFF ONTAP cluster, which two steps are needed to move the SAN UFs to new nodes that are members of a portset? (Choose two.)
- A. Remove the LIF from the portset.
- B. Disable the zoning of the LIF WWPN.
- C. Take the SAN LIF offline.
- D. Disable the SLM feature for the node that hosts the LIF.
Answer: A,C
NEW QUESTION # 24
What needs to be done to create a consistent Snapshot copy of a LUN without disruptions?
- A. Ensure that the LUN Is unmapped from the host.
- B. Quiesce I/O to the LUN.
- C. Map the LUN to a host.
- D. Ensure that the LUN is the only one in the volume.
Answer: B
Explanation:
To create a consistent Snapshot copy of a LUN without disruptions, it is necessary to quiesce I/O to the LUN.
This process involves pausing or temporarily stopping the input/output operations to ensure that the data is in a consistent state when the snapshot is taken. This method is crucial for maintaining data integrity and consistency in the snapshot.
For further details, refer to:
* NetApp Documentation on Snapshot Consistency
* NetApp Best Practices for Snapshot Management
NEW QUESTION # 25
An administrator needs to ensure that Snapshot copies of database files across multiple FCP LUNs are taken at the same point in time.
Which two configurations enable the administrator to achieve this? (Choose two.)
- A. Create a consistency group that uses FlexGroup volumes.
- B. Create each LUN within the same FlexVol volume.
- C. Create a consistency group that uses FlexVol volumes.
- D. Create each LUN within the same FlexGroup volume.
Answer: C,D
Explanation:
To ensure that Snapshot copies of database files across multiple FCP LUNs are taken at the same point in time, the following configurations can be used:
* Create a consistency group that uses FlexVol volumes: This setup ensures that snapshots of all volumes in the consistency group are taken simultaneously.
* Create each LUN within the same FlexGroup volume: This configuration allows for a unified snapshot across multiple LUNs within the FlexGroup, ensuring data consistency.
For more details, see:
* NetApp Documentation on Consistency Groups
* NetApp FlexGroup Overview
NEW QUESTION # 26
A healthcare customer wants to Implement an FC SAN solution consisting of a NetApp ONTAP system, Broadcom switches, and servers.
Which tool contains detailed blueprints and implementation references that can be used to design this solution?
- A. NetApp Active IQ Unified Manager
- B. NetApp Active IQ Config Advisor
- C. NetApp Fusion
- D. NetApp Verified Architecture
Answer: D
Explanation:
The correct tool for designing an FC SAN solution consisting of a NetApp ONTAP system, Broadcom switches, and servers is the "NetApp Verified Architecture" (NVA). The NetApp Verified Architecture provides comprehensive blueprints and detailed implementation references. These blueprints are thoroughly tested, prescriptive in nature, and designed to minimize deployment risks and accelerate time to market. They are specifically designed to help ensure that the architecture meets the high standards required for enterprise environments.
NVA documents include design guides, best practices, and detailed configuration steps, making them invaluable for planning and deploying complex solutions like the one described.
For more information, you can refer to the official NetApp documentation on NetApp Verified Architectures:
* NetApp Verified Architecture Program Summary
* NetApp Verified Architecture Overview
These resources provide detailed insights into the architecture, including technology requirements, deployment procedures, and additional references for further reading.
NEW QUESTION # 27
What is the maximum size for a LUN in NetApp ONTAP 9.14.1 software?
- A. 128TiB
- B. 300TiB
- C. 16TiB
- D. 64TiB
Answer: A
Explanation:
In NetApp ONTAP 9.14.1 software, the maximum size for a LUN is128TiB. This limit ensures that large datasets can be stored and managed efficiently within a single LUN, catering to the needs of high-capacity SAN environments
NEW QUESTION # 28
A storage engineer in SAN environment needs to Identify FC ports using the company-wide naming policy.
Which command will accomplish this task?
- A. TCP portname set
- B. network interface modify
- C. vserver fcp wwpn-alias set
- D. ucadmin modify
Answer: C
Explanation:
The vserver fcp wwpn-alias set command is used to set or modify the World Wide Port Name (WWPN) aliases for Fibre Channel (FC) ports in a NetApp ONTAP environment. This command allows you to apply a company-wide naming policy to FC ports, ensuring consistent and easily identifiable naming conventions across your storage infrastructure.
For further details, you can refer to:
* NetApp Documentation on FC Management
* NetApp Community Discussion on WWPN Aliases
NEW QUESTION # 29
A customer has a 10GB volume with an 8GB LUN that is using 7GB. The snapshot policy is hourly and retains 48 snapshots. After a ransomware attack that encrypts all files on the LUN, the customer notices that all snapshots are gone.
What could cause this behavior?
- A. Autonomous Ransomware Protection
- B. Snapshot autodelete
- C. Aggregate overcommitted
- D. Volume thinly provisioned
Answer: B
Explanation:
The likely cause for the disappearance of all snapshots after a ransomware attack that encrypted all files on the LUN is the Snapshot autodelete feature. When the volume becomes full due to the encryption, the autodelete feature removes older snapshots to free up space, preventing the volume from running out of space and ensuring write operations can continue.
For more information, see:
* NetApp Documentation on Snapshot Autodelete
* NetApp Community Discussion on Snapshot Deletion
NEW QUESTION # 30
An administrator runs the vserver nvme namespace convert-from-iun command on a NetApp ASA cluster to increase host performance.
What is modified by the convert command?
- A. FlexVol
- B. Metadata
- C. FlexClone
- D. LUN clone
Answer: B
Explanation:
The vserver nvme namespace convert-from-lun command in a NetApp ASA cluster is used to convert a LUN to an NVMe namespace to increase host performance. This process involves modifying themetadataof the storage object to make it compatible with the NVMe protocol, allowing for faster access and reduced latency
NEW QUESTION # 31
A four-node NetApp ONTAP SAN cluster has been deployed. After installation, the engineer wants to verify cabling.
Which NetApp tool should the engineer use?
- A. Active IQ Config Advisor
- B. Hardware Universe
- C. NetApp Host Utilities package
- D. Interoperability Matrix Tool
Answer: A
Explanation:
To verify the cabling of a four-node NetApp ONTAP SAN cluster after installation, the recommended tool is Active IQ Config Advisor. This tool provides detailed checks for proper configuration, including cabling verification, and helps ensure that best practices are followed for optimal performance and reliability.
For further details, see:
* NetApp Active IQ Config Advisor
NEW QUESTION # 32
A NetApp AFF node in a four-node cluster has a single FC port on one node, which Is used for legacy tape backup. Tape is no longer needed, and the port is disconnected and modified for reuse in the FCP SAN.
Based on this change, which command will verify that the port is usable?
- A. vserver fcp initiator show
- B. networkinterface show
- C. syszem node hardware unified-connect show
- D. lun persistent-reservationshow
Answer: C
Explanation:
To verify that a modified FC port is usable after it has been repurposed from tape backup to FCP SAN, the command system node hardware unified-connect show should be used. This command checks the status and configuration of the unified connect hardware, ensuring that the port is correctly set up for the new function in the SAN environment.
For additional details, see:
* NetApp Command Reference
NEW QUESTION # 33
Which two steps must be taken first to restore a LUN from a SnapMirror Synchronous destination? (Choose two.)
- A. Initialize the relationship.
- B. Release the relationship.
- C. Delete the relationship.
- D. Resync the relationship.
Answer: B,C
Explanation:
To restore a LUN from a SnapMirror Synchronous destination, the following steps must be taken:
* Release the relationship: This step is necessary to break the SnapMirror relationship, allowing the LUN to be restored independently.
* Delete the relationship: After releasing the relationship, deleting it ensures that there are no residual dependencies or configurations that might interfere with the restore process.
For more information, refer to:
* NetApp Documentation on SnapMirror Synchronous (NetApp) (NetApp).
NEW QUESTION # 34
An administrator upgraded their NetApp ONTAP software from release 9.10.1 to 9.13.1 on a NetApp All SAN Array (ASA) cluster and is creating a new iSCSI SVM.
Which automatic feature can be used with iSCSI?
- A. CHAP authentication
- B. LUN mapping
- C. LIF failover
- D. igroup creation
Answer: C
Explanation:
In NetApp ONTAP 9.13.1, one of the automatic features that can be used with iSCSI isLIF failover. This feature ensures that in the event of a network failure or a node issue, the Logical Interface (LIF) will automatically fail over to another available port, maintaining connectivity and minimizing disruption to iSCSI traffic.
For more information, refer to:
* NetApp ONTAP 9.13.1 Features
NEW QUESTION # 35
A storage administrator has just completed an ISCSI implementation in a customer environment running VMware and needs to validate that the entire network path supports jumbo frames.
Which action should be taken?
- A. Check the VMkernel adapter settings.
- B. Ping from the host with fragmentation.
- C. Ping from the host without fragmentation.
- D. Check the broadcast domain settings.
Answer: B
Explanation:
To validate that the entire network path supports jumbo frames after an iSCSI implementation, you should perform a ping test from the host with fragmentation. This involves using the ping command with specific options to test jumbo frame support:
ping -M do -s 8972 <target_IP>
In this command:
* -M do ensures the packets are not fragmented.
* -s 8972 sets the packet size to 8972 bytes (9000 bytes MTU minus 28 bytes for the ICMP header).
By confirming that the large packets are successfully transmitted without fragmentation, you can validate that the network path, including switches and adapters, supports jumbo frames.
For more details, you can check:
* NetApp Documentation - iSCSI Configuration and Best Practices (NetApp) (NetApp).
NEW QUESTION # 36
A storage administrator has a NetApp AFF SAN cluster in a multitenant environment. Another user has requested access to perform only replication within a specific SVM to another cluster.
Which default role would be used in this scenario?
- A. vsadmin-protocol
- B. vsadmin-backup
- C. backup
- D. readonly
Answer: B
Explanation:
In a multitenant environment where a user needs access only to perform replication within a specific SVM to another cluster, the default rolevsadmin-backupis appropriate. This role provides thenecessary permissions to manage backup and replication tasks without granting broader administrative rights.
For more details, see:
* NetApp Documentation on User Roles
* NetApp Community Discussion on Roles
NEW QUESTION # 37
After deleting a LUN, an administrator notices that the space does not show as available. What needs to be done to reclaim the space?
- A. Purge the recovery queue.
- B. Perform space reclamation.
- C. UnmaptheLUN.
- D. Delete the volume snapshots.
Answer: B
Explanation:
After deleting a LUN, if the space does not show as available, performing space reclamation is necessary.
Space reclamation involves identifying and reclaiming unused space on the storage system, making it available for new data. This process ensures that the deleted LUN's space is properly freed up and reflected in the available storage capacity.
For more details, refer to:
* NetApp Documentation on Space Reclamation
* NetApp Community on Free Space Reclamation
NEW QUESTION # 38
A customer has a two-node NetApp ONTAP cluster that Is hosting FC LUNs for 64 SAN hosts. An administrator is tasked to add 40 more hosts to the environment.
What two actions would the administrator need to take to avoid potential performance problems with the environment? (Choose two.)
- A. Configure additional SAN LIFs.
- B. Configure additional FC target ports.
- C. Configure additional FC ports on existing hosts.
- D. Configure a higher queue depth on the target ports.
Answer: A,B
Explanation:
When adding 40 more hosts to a two-node NetApp ONTAP cluster that is already hosting 64 SAN hosts, the following actions are necessary to avoid potential performance problems:
* Configure additional FC target ports: Increasing the number of Fibre Channel (FC) target ports on the storage nodes will help distribute the I/O load more evenly, reducing the risk of bottlenecks.
* Configure additional SAN LIFs: Adding more SAN Logical Interfaces (LIFs) will ensure that the increased number of hosts can connect efficiently, improving load balancing and path management.
These actions help maintain optimal performance and prevent congestion in the SAN environment.
For more detailed guidance, refer to:
* NetApp SAN Host Configuration Overview
* NetApp Best Practices for SAN (NetApp) (NetApp)
NEW QUESTION # 39
......
Prepare With Top Rated High-quality NS0-521 Dumps For Success in Exam: https://www.real4prep.com/NS0-521-exam.html
Get Totally Free Updates on NS0-521 Dumps PDF Questions: https://drive.google.com/open?id=1KxVSdiKfdFxnaxOE7YhtH4itNPYbblAo