Authentic JN0-363 Dumps - Free PDF Questions to Pass
Guaranteed Accomplishment with Newest Nov-2023 FREE JN0-363
Juniper JN0-363 (Service Provider Routing and Switching, Specialist (JNCIS-SP)) Exam is a certification program that is designed to help individuals gain expertise in the field of service provider routing and switching. Service Provider Routing and Switching, Specialist (JNCIS-SP) certification program is designed for professionals who want to enhance their skills in designing and implementing complex service provider networks. Service Provider Routing and Switching, Specialist (JNCIS-SP) certification program is intended for professionals who have basic knowledge and understanding of networking concepts and protocols.
NEW QUESTION # 121
You want to see a detailed list of all established BGP sessions. In this scenario, what would be a valid command to accomplish this task?
- A. show bgp neighbor
- B. show rouse receive-protocol bgp <neighbor IP address>
- C. show bgp summary
- D. show rouse protocol bgp
Answer: D
NEW QUESTION # 122
Click the Exhibit button.
Referring to the exhibit what are two reasons for the configuration stanza? (Choose two.)
- A. to reduce the risk of forwarding traffic through a stateless tunnel
- B. to remove the tunnel interface from inet.0 after the hold-time expires
- C. to mark the tunnel up after the hold-time expires
- D. to mark the tunnel down after the hold-time expires
Answer: A,D
NEW QUESTION # 123
According to Juniper Networks, what are two reasons to peer using loopback addresses when configuring BGP? (Choose two.)
- A. When establishing a single-link EBGP connection
- B. When routers are not in the same autonomous system
- C. When establishing an IBGP connection
- D. When routers are not directly connected
Answer: C,D
NEW QUESTION # 124
By default, which RSVP reservation style is used by the Junos OS?
- A. shared explicit
- B. wildcard filter
- C. fixed explicit
- D. fixed filter
Answer: D
NEW QUESTION # 125
Which three attributes are well-known mandatory BGP attributes? (Choose three.)
- A. AS path
- B. MED
- C. next-hop
- D. local preference
- E. origin
Answer: A,C,E
Explanation:
https://www.kwtrain.com/blog/bgp-pt2
NEW QUESTION # 126
Which two statements are true about IBGP on MX Series devices? (Choose two.)
- A. It does not support multihop
- B. Interface Lo0 must be used for peering
- C. It is loop free by default
- D. Neighbors can be located anywhere within the AS
Answer: C,D
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/bgp-ibgp-peering.html
NEW QUESTION # 127
What is the OSPFv3 router ID?
- A. 0.0.0.0
- B. 192.168.1.1
- C. 2001::1:2
- D. 2001::192.168.1.1
Answer: B
NEW QUESTION # 128
Click the Exhibit button.
Referring to the exhibit, which two statements are true? (Choose two.)
- A. The local-address statement is required for the BGP session to establish correctly
- B. The configuration is for an internal BGP session
- C. The multi-hop statement is required for the BGP session to establish correctly
- D. The configuration is for an external BGP session
Answer: A,B
NEW QUESTION # 129
What are three well-known mandatory BGP attributes? (Choose three.)
- A. AS path
- B. MED
- C. community
- D. origin
- E. next hop
Answer: A,D,E
NEW QUESTION # 130
Click the Exhibit button.
Referring to the exhibit, which two statements are true? (Choose two.)
- A. The BGP peering between R1 and R4 should use physical interface addresses
- B. The BGP peerings between R1, R2, and R3 should use loopback interface addresses
- C. The BGP peerings between R1, R2, and R3 should use physical interface addresses
- D. The BGP peering between R1 and R4 should use loopback interface addresses
Answer: A,B
NEW QUESTION # 131
You are asked to configure the OSPF environment to prevent the DR other routers from participating in DR/BDR election.
Referring to the exhibit, which command will accomplish this task?
- A. set protocols ospf area 0.0.0.0 interface ge-0/0/1 interface-type nbma
- B. set protocols ospf area 0.0.0.0 interface ge-0/0/l priority 255
- C. set protocols ospf area 0.0.0.0 interface ge--0/0/1 interface-type p2p
- D. set protocols ospf area 0.0.0.0 interface ge-0/0/1 priority 0
Answer: B
NEW QUESTION # 132
You asked to deploy a large-scale IS-IS network with multiple areas.
In this scenario, which two statements are true? (Choose two.)
- A. The area IDs must be the same for Level1 routers to from an adjacency.
- B. Level1 routers can from an adjacency with any other Level 1 router.
- C. Level1 routers can from an adjacency with any other Level 2 router.
- D. The area IDs must be the same for Level 2 routers to from an adjacency.
Answer: A,B
NEW QUESTION # 133
Click the Exhibit button. You have two routers connected over a Gigabit Ethernet link as shown in the exhibit It is required that an IS-IS adjacency be established without the need for a designated intermediate system (DIS)
Which configuration statement entered on both routers will achieve this goal?
- A. set protocols isis interface ge-0/0/2.0 no-dis
- B. set interface ge-0/0/2 unit 0 family iso no-dis
- C. set interface ge-0/0/2 unit 0 family iso point-to-point
- D. set protocols isis interface ge-0/0/2.0 point-to-point
Answer: D
NEW QUESTION # 134
The segment touting SRGB start label Is 10,000 and the SRGB index range is 500.
In this scenario, which two statements are correct? (Choose two.)
- A. The first usable label Is 10,000.
- B. The last usable label is 10,499.
- C. The last usable label is 10.501.
- D. The first usable label is 10,001.
Answer: A,B
NEW QUESTION # 135
Click the Exhibit button. Two bridge domains are configured as shown in the exhibit.
What must be configured as part of the ge-1/0/3 interface configuration to accept tagged frames of VLANs 100 and 200?
- A. vlan-id-range [100 200]
- B. encapsulation ethernet-bridge
- C. interface-mode trunk
- D. encapsulation vlan-bridge
Answer: D
NEW QUESTION # 136
Exhibit
Referring to the exhibit, internal BGP between R1 and R2 is not establishing.
What is the problem In this scenario?
- A. R1 and R2 must each have unique AS numbers.
- B. R1 needs to be configured with a next-hop self policy.
- C. R1 does not have a route to 192.168.200.2.
- D. R1 needs to be configured with an explicit router ID.
Answer: C
NEW QUESTION # 137
Click the Exhibit.
Referring to the exhibit, what is the correct OSPF interface state for the ge-0/0/1 interface?
- A. BDR
- B. DR
- C. Down
- D. DRother
Answer: B
NEW QUESTION # 138
Click the Exhibit button.
You are asked to configure OSPF for the network?
Referring to the exhibit, how should Area 1 be configured?
- A. backbone area
- B. not-so-stubby area
- C. totally stubby area
- D. stub area
Answer: D
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/configuring-ospf-areas.html
NEW QUESTION # 139
Which statement is true about routing instances on Junos devices?
- A. Each routing instance is a unique grouping of routing tables, interfaces, and routing protocol parameters.
- B. Routing information cannot be shared between routing instance.
- C. Each routing protocol runs in a separate routing instance.
- D. Junos device support only one routing instance.
Answer: A
NEW QUESTION # 140
In your RSVP network you have configured three separate LSPs to the same egress address. You have made no other configuration changes to the forwarding decisions made by the router.Which commands can you use to determine which LSP is being used to forward packets?
- A. show rsvp session
- B. show route table inet.4
- C. show route table inet.3
- D. show rsvp neighbor
Answer: C
NEW QUESTION # 141
Click the Exhibit button. Two bridge domains are configured as shown in the exhibit.
What must be configured as part of the ge-1/0/3 interface configuration to accept tagged frames of VLANs 100 and 200?
- A. vlan-id-range [100 200]
- B. encapsulation ethernet-bridge
- C. interface-mode trunk
- D. encapsulation vlan-bridge
Answer: D
NEW QUESTION # 142
Click the Exhibit.
Referring to the exhibit, what is the result of applying this policy?
- A. The 172.18.1.0/24 prefix will be redistributed into OSPF as an external route.
- B. The 172.18.1.1/32 prefix will be redistributed into OSPF as an internal route.
- C. The 172.18.1.0/24 prefix will be redistributed into OSPF as an internal route.
- D. The 172.18.1.1/32 prefix will be redistributed into OSPF as an external route.
Answer: A
NEW QUESTION # 143
By default, which three criteria are used by the Junos load-balancing algorithm to determine a traffic flow? (Choose three.)
- A. destination address
- B. source address
- C. destination port
- D. protocol
- E. source port
Answer: A,B,D
NEW QUESTION # 144
You are asked to design a Layer 2 VPN service between service provider networks that needs Ethernet transport capabilities. The VPN should support two or three endpoints. Which Layer 2 VPN technology should you propose?
- A. BGP-signaled VPLS, using the RFC 4448 Layer 2 frame format
- B. LDP-signaled VPLS
- C. LDP Layer 2 circuit, using the RFC 4448 Layer 2 frame format
- D. BGP Layer 2 VPN
Answer: A
NEW QUESTION # 145
What Is a key differentiators of generate routes from aggregate routes?
- A. Generate routes use a forwarding next hop.
- B. Generate routes have a default preference value of 210.
- C. Generate routes have a default next-hop value of reject.
- D. Generate routes cannot be used as a gateway of last resort.
Answer: B
NEW QUESTION # 146
......
The JN0-363 certification exam is a comprehensive exam that requires a broad range of knowledge and skills. Candidates will be tested on their ability to design, implement, and troubleshoot service provider networks. JN0-363 exam is designed to validate the skills and knowledge needed to be a successful service provider network engineer.
JN0-363 Braindumps PDF, Juniper JN0-363 Exam Cram: https://www.real4prep.com/JN0-363-exam.html
Use Valid New Free JN0-363 Exam Dumps & Answers: https://drive.google.com/open?id=1nYKTkjyfvWmjaLJP3E18G6nTV6nwZS8a