Get Ready to Boost your Prepare for your HPE6-A73 Exam with 130 Questions
Use Free HPE6-A73 Exam Questions that Stimulates Actual EXAM
Aruba's switching solutions are widely used in various industries, including healthcare, education, hospitality, and retail. Therefore, the HPE6-A73 certification can benefit IT professionals working in these industries, as well as those interested in pursuing careers in network administration, technical support, and network engineering.
NEW QUESTION # 39
How does an administrator install a script and create an agent and actions for the Network Analysis Engine running on AOS-CX switches?
- A. Use the NetEdit web user interface
- B. Access the switches' web user interface
- C. Use Aruba Central's web user interface
- D. Access the switches' command-line interface.
Answer: B
NEW QUESTION # 40
An administrator is defining a VSX LAG on a pair of AOS-CX switches that are defined as pnmary and secondary The VSX LAG fails to establish successfully with a remote switch; however, after verification, the remote switch is configured correctly. The administrator narrows down the problem to the configuration on the AOS-CX switches.
What would cause this problem?
- A. LACP was enabled in active mode on the VSX LAG
- B. The VSX LAG interfaces are in layer-3 mode
- C. Local optimization was not enabled on the VSX LAG
- D. The VSX LAG hash does not match the remote peer
Answer: D
NEW QUESTION # 41
Examine the configuration of Core-1 and Core-2. AOS-CX switches configured as a VSX stack:
Core1: Interlace lag 256
no shutdown
no routing
vlan trunk allowed all
lacp mode active Interface 1/1/46
no shutdown
lag 256 Interface 1/1/47
no shutdown
lag 256
VSX
Inter-switch-link lag 256
vsx-sync vsx-global
exit
Cofe2: interlace lag 250
no shutdown
no routing
vlan trunk allowed all
lacp mode active
Interlace 1/1/46
no shutdown
lag 256 Interface 1/1/47
no shutdown
lag 256 vsx
inter-switch-link lag 256
exit
When using the "show vsx status" command, the two switches fall to connect and successfully synchronize. What should the administrator do to fix this issue?
- A. Define the VSX roles on the two switches.
- B. Define a larger MTU on the ISL link of the two switches.
- C. Enable active-active forwarding on the two switches.
Answer: A
NEW QUESTION # 42
An administrator creates an ACL rule with both the "count" and "log" option enabled. What is correct about the action taken by an AOS-CX switch when there is a match on this rule?
- A. The "count" and "log" options are processed by the AOS-CX switch's hardware ASIC
- B. Logging will not include certificate and TLS events, but counting will
- C. The total in the "log" record and the count could contain different rule matching statistics
- D. By default, a summarized log is created every minute with a count of the number of matches
Answer: C
NEW QUESTION # 43
A company has an existing wireless solution involving Aruba APs and Mobility controllers running 8 4 code The solution leverages a third-party AAA solution. The company is replacing existing access switches with AOS-CX 6300 and 6400 switches The company wants to leverage the same security and firewall policies for both wired and wireless traffic.
Which solution should the company implement?
- A. Downloadable user roles
- B. User-based tunneling
- C. RADIUS dynamic authorization
- D. IPSec
Answer: B
NEW QUESTION # 44
Examine the attached exhibit.
The network administrator it trying to add a remote location as area 3 to the network shown in the diagram.
Based on Current connection restrictions, the administrator cannot connect area 3 directly to area 0. The network is using AOS-CX switches.
Which feature should the administrator implement to provide connectivity to the remote location?
- A. Not-so-study areas
- B. Virtual links
- C. OSPFv3
- D. Bidirectional forward detection (BFD
Answer: B
NEW QUESTION # 45
Examine the following AOS-CX switch configuration:
Which statement correctly describes what is allowed for traffic entering interface 1/1/3?
- A. IP traffic from 10.1.11.0/24 is allowed to access 10.1.110.0/24
- B. IP traffic from 10.1.12.0/24 is allowed to access 172.0.1.0/23
- C. Traffic from 10.0.12.0/24 will generate a log record when accessing 10.0.11.0/24
- D. IP traffic from 10.0.11.0/24 is allowed to access 10.1.12.0/24
Answer: C
NEW QUESTION # 46
Examine the attached diagram.
The two PCs are located in VLAN 11 (10.1.11.0/24). Which example defines how to implement active gateway on the VSX core for VLAN 11?
- A. interface vlan 11
active-gateway ip 10.1.11.1
active-gateway mac 02:02:00:00:01:00 - B. interface lag 254
active-gateway vlan 11 ip 10.1.11.1
active-gateway vlan 11 mac 02:02:00:00:01:00 - C. vsx
vrrp group 1 - D. interface lag 254
active-gateway ip 10.1.11.1
active-gateway mac 02:02:00:00:01:00
Answer: A
NEW QUESTION # 47
An administrator is supporting a network with the access layer consisting of AOS-CX 6300 and 6400 switches. The administrator needs to quickly deploy Aruba IAPs and security cameras in the network, ensuring that the correct QoS and VLAN settings are dynamically applied to the switch ports. Currently, switches are not configured to do device authentication, and no authentication server exists in the network.
Which AOS-CX feature should the administrator use to dynamically assign the policy settings to the correct switch ports?
- A. Device profiles
- B. Dynamic segmentation
- C. Voice VLANs
- D. Change of authorization
Answer: B
NEW QUESTION # 48
What would prevent two OSPF routers from forming an adjacency? (Select two.)
- A. Different router IDs
- B. Different IP addresses
- C. Different MTU sizes
- D. Different priorities
- E. Different area types
Answer: B,D
NEW QUESTION # 49
An AOS-CX switch is configured to implement downloadable user roles. Examine the AOS-CX switch output:
Based on this output, what is the state of the user's access?
- A. The port should be configured for 802.1X
- B. MAC authentication has passed, but 802.1X authentication is in progress
- C. The RADIUS request timed out to the AAA server
- D. No downloadable user role exists
Answer: A
NEW QUESTION # 50
How js voice traffic prioritized correctly on AOS-CX switches'?
- A. By placing tt in the strict priority queue
- B. By implementing weighted fair queueing (WFQ)
- C. By implementing voice VLANs
- D. By defining device profiles with QOS settings
Answer: C
NEW QUESTION # 51
Examine the commands entered on an AOS-CX switch:
What is true regarding this configuration for traffic received on interface 100?
- A. The traffic is always dropped if the next-hop addresses are unreachable.
- B. The next-hop address of 1.1.1.1 is overwritten by the next-hop address of 2.2.2.2.
- C. The default next-hop address supersedes the two preceding next-hop addresses.
- D. The traffic will be routed with the IP routing table entries if the next-hop addresses are unreachable.
Answer: C
NEW QUESTION # 52
A network administrator is implementing NAE on AOS-CX switches. When attempting to create an agent on a particular switch, the agent appears in the NAE Agents panel with a red triangle error symbol and a status of "Unknown".
What is the cause of this issue?
- A. The number of scripts or agents has exceeded the hardware's capabilities
- B. The administrator does not have the appropriate credentials to interact with NAE
- C. A connectivity issue exists between NAE and the AOS-CX switch
- D. The RESTful API has not been enabled on the AOS-CX switch
Answer: A
Explanation:
https://www.arubanetworks.com/techdocs/AOS-CX/10.06/HTML/5200-7717/Content/Chp_TS/err-nae-age-not-cre-db-con-vio-err.htm
NEW QUESTION # 53
An administrator wants to leverage the Network Analysis Engine (NAE) feature on AOS-CX switches to perform root cause analysis and to assist in quickly identifying problems. Which two AOS-CX databases does the administrator have access to when implementing scripts? (Select two.)
- A. API
- B. Audit
- C. Time-series
- D. Configuration
- E. VSX
Answer: C,E
NEW QUESTION # 54
......
HPE6-A73 exam is a comprehensive certification that covers a wide range of topics related to Aruba switching solutions. HPE6-A73 exam covers topics such as VLANs, VSF, ArubaOS-Switch management and configuration, link aggregation, and much more. HPE6-A73 exam is designed to test the candidate's knowledge of the Aruba switching solutions and their ability to apply this knowledge in real-world scenarios.
HP HPE6-A73 exam is intended for IT professionals who have already gained practical experience in network switching using Aruba's technologies. To be eligible for HPE6-A73 exam, candidates must have completed the Aruba Certified Switching Associate (ACSA) certification or have equivalent knowledge and experience.
BEST Verified HP HPE6-A73 Exam Questions (2024) : https://www.real4prep.com/HPE6-A73-exam.html
Get 100% Real HPE6-A73 Free Online Practice Test: https://drive.google.com/open?id=1yc1RNjv2SKeR-bUj3x2zQYpptjLVJT5t