C_IBP_2305 PDF Download Feb-2024 SAP Test To Gain Brilliante Result!
Provide Updated SAP C_IBP_2305 Dumps as Practice Test and PDF
NEW QUESTION # 24
Which of the following are capabilities of the Manage Forecast Error Calculations - Inventory Optimization app?Note: There are 2 correct answers to this question.
- A. Propagate forecast error to upstream locations in a supply chain network
- B. Identifiy intermittent demand for Forecast Error CV calculations
- C. Adjust for forecast bias in Forecast Error CV calculations
- D. Adjust Safety Stock Recommendations based on forecast error CV input
Answer: C,D
NEW QUESTION # 25
Which of the following data can be tracked using a change-history-enabled key figure?Note: There are 3 correct answers to this question.
- A. Key figure type
- B. Attributes
- C. Reason code
- D. Scenario ID
- E. Modified date
Answer: B,C,E
NEW QUESTION # 26
Which sourcing methods are required to identify the product flow through the network? Note: There are 3 correct answers to this question.
- A. Sourcing via Production
- B. Unspecified Sourcing
- C. Sourcing via Demand Prioritization
- D. Sourcing via Costs
- E. Customer Sourcing Rule
Answer: A,D,E
NEW QUESTION # 27
What are some of the prerequisites for configuring a planning area that results in a successful consistency check?Note: There are 2 correct answers to this question.
- A. Specify a planning horizon in the planning area for each level of the assigned time profile.
- B. Assign the compound master data type and its component master data types.
- C. Configure at least one calculated key figure for the planning area.
- D. Configure at most two input key figures on the same planning level in a key figure calculation.
Answer: A,B
NEW QUESTION # 28
Which constraints are taken into account by the Time-Series-Based Supply Planning Heuristic (Infinite)?Note: There are 3 correct answers to this question.
- A. Transportation lead times
- B. Maximum lot size
- C. Minimum lot size
- D. Aggregated constraints
- E. Adjusted transport receipts
Answer: A,B,E
NEW QUESTION # 29
You are adding a value-based filter to a planning view.Which of the following conditions apply?Note: There are 3 correct answers to this question.
- A. The alerts dashboard is not available if a value-based filter is set for the open planning view.
- B. These filters are always applied based on the values stored in the database.
- C. These filters can be used together with attribute totals in the same planning view.
- D. You can only apply one value-based filter per planning view.
- E. You can add (or delete) planning objects to a planning view after these filters are applied.
Answer: A,B,D
NEW QUESTION # 30
You are starting a new implementation project for SAP IBP and are considering the possible system architecture.What are the possible approaches for setting up the system landscape?Note: There are 2 correct answers to this question.
- A. Set up a three-tier landscape using transport, starting from the development system to test and production.
- B. Set up a two-tier landscape, and have the configuration of the development system regularly updated from the production system.
- C. Create additional test planning areas in the production system to support cutover needs.
- D. Create additional planning areas in the test system to support training needs.
Answer: A,B
NEW QUESTION # 31
You need to make manual adjustments to your S&OP plan.Which are possible ways of making these changes?Note: There are 2 correct answers to this question.
- A. Using Driver-Based planning
- B. Using Microsoft Excel planning views
- C. Leveraging the web-based planning capability
- D. Leveraging the functionality of SAP Workzone
Answer: B,C
NEW QUESTION # 32
Which of the following are functions of SAP IBP for demand?Note: There are 2 correct answers to this question.
- A. Detailed statistical analysis of demand data using predictive analytics tools
- B. Consideration of demand-driven analysis for buffer positioning.
- C. Embedded, on-the-fly demand analytics
- D. Demand sensing of demand data using predictive analytics tools
Answer: A,C
NEW QUESTION # 33
Which type of Master Data will be represented by the Master Data Type LOCATIONFR?
- A. Reference Master Data Type
- B. Virtual Master Data Type
- C. Compound Master Data Type
- D. External Master Data Type
Answer: A
NEW QUESTION # 34
You are implementing SAP IBP to plan for a supply chain that experiences high seasonality.What supply planning operators can be used in your model to plan stock pre-builds?
- A. Supply optimizer only
- B. Supply optimizer and supply heuristics
- C. Finite and infinite heuristics
- D. Finite heuristics only
Answer: B
NEW QUESTION # 35
You have set up a planning area, and data is now available. You adjust the necessary time profile settings and run a consistency check.Which settings can you change and still run a successful consistency check?Note:
There are 2 correct answers to this question.
- A. Change the description of the attributes in the time profile.
- B. Change the past and future horizon of the levels in the time profile.
- C. Change the numbering hierarchy of the period IDs in the time profile.
- D. Add a new time profile level to the time profile.
Answer: A,B
NEW QUESTION # 36
Which of the following are inputs to Demand Sensing with Gradient Boosting (Full) algorithm?Note: There are 2 correct answers to this question.
- A. Forecast Error CV Calculated by Manage Forecast Error Calculations app
- B. Future Consensus Forecasts and Lagged Forecast Snapshots
- C. Sales Order Quantities (both historical and future open orders)
- D. Recommended Safety Stocks from Multistage Inventory Optimization
Answer: B,D
NEW QUESTION # 37
You want to maintain key figure values for a new attribute and value combination, using SAP IBP, Add-in for Microsoft Excel, and are receiving an error related to missing combinations.How can you resolve this problem?Note: There are 2 correct answers to this question.
- A. Use the Data Integration app to load suitable data that creates the combinations
- B. Use the Check Mode operator to create the combinations
- C. Use the option New Planning Object in the SAP IBP, add-in for Microsoft Excel
- D. Use the Manage Master Data app to create the combinations
Answer: A,D
NEW QUESTION # 38
Safety Stock outputs from Multistage Inventory Optimization are sent to which of these processes? Note:
There are 2 correct answers to this question.
- A. Supply Heuristics in SAP IBP for sales and operations
- B. Charts creation in SAP Supply Chain Control Tower
- C. Demand Sensing with Gradient Boosting (Full)
- D. Decoupling Points determination in SAP IBP for demand-driven replenishment
Answer: A,C
NEW QUESTION # 39
Which of the following checks for master data and key figures does the Check Mode algorithm trigger?Note:
There are 3 correct answers to this question.
- A. It checks whether the required planning level master data exists for a subset of input key figures.
- B. It checks whether the location resource specified in the master data forms a cycle in the supply chain network.
- C. It checks whether the heuristic detects cycles formed by nodes (such as location products) in the supply chain network.
- D. It checks whether the sourcing in the Production Source Item Master Data type exists.
- E. It checks whether the location products specified in the master data are connected by customer sourcing rules within the supply chain network.
Answer: A,C,E
NEW QUESTION # 40
What function would you use to configure a year-to-date calculation?
- A. Cumulative Aggregation
- B. Rolling Aggregation
- C. Last Period Aggregation
- D. Dynamic Rolling Aggregation
Answer: A
NEW QUESTION # 41
What do you need to be aware of when using multiple pairs of key figures in one copy operator? Note: There are 2 correct answers to this question.
- A. If necessary source key figures values are disaggregated.
- B. Copying multiple key figures on different planning levels is not possible.
- C. Copying multiple key figures can be processed sequentially.
- D. If necessary target key figures values are disaggregated.
Answer: A,C
NEW QUESTION # 42
You are working on a mid-range plan that spans the seasonal peak and you are evaluating the need for additional crewing.Which of the following parameters can you model to plan production with extra shift(s)?
- A. Production source validity at the start of seasonal peak
- B. Incremental production values
- C. Capacity expansion with additional costs
- D. Adjusted production interactive values
Answer: C
NEW QUESTION # 43
You need to create time periods for the time profile in a planning area.What should you be aware of when running the Create Time Periods application job?
- A. This application job can be run for multiple time profiles at once.
- B. The assigned Planning Area must be active.
- C. In the Parameter Section of the application job, choose the Time Profile ID and Planning Area.
- D. A time profile has to be activated so that the application job can proceed.
Answer: C
NEW QUESTION # 44
You have to be logged on to two separate SAP IBP tenants.What can help you differentiate the appearance of their user interfaces?Note: There are 2 correct answers to this question.
- A. Defining a different default planning area via the User Preferences.
- B. Add the system name and tenant information from the About section to the Home page.
- C. Setting a separate theme for the Home page in the Web UI.
- D. Having a different set of tiles in the Home group of apps.
Answer: B,C
NEW QUESTION # 45
Which of the following data inputs, when increased, will always cause an increase in the safety stock outputs when the Global (multi-stage) Inventory Optimization operator is run?Note: There are 2 correct answers to this question.
- A. Holding Cost Percentage
- B. Transportation Lead Time Error CV
- C. Target Service Level
- D. Minimum Lot Size
Answer: C,D
NEW QUESTION # 46
What are some of the properties of filter blocks?Note: There are 3 correct answers to this question.
- A. Filter blocks are imposed when modeling attribute transformations.
- B. Filter blocks can be visualized in SAP IBP, add-in for Microsoft Excel
- C. Filter blocks are imposed when modeling an attribute as a key figure.
- D. Filter blocks are imposed when modeling cross-period calculations.
- E. Filter blocks can be visualized in the Key Figure Calculations app.
Answer: A,B,C
NEW QUESTION # 47
Which conditions have to be fulfilled as a prerequisite to maintain a key figure disaggregation?Note: There are 2 correct answers to this question.
- A. The key figure is calculated and system editable.
- B. The key figure is stored and system editable.
- C. The key figure is stored and all editable.
- D. The key figure is calculated and all editable.
Answer: C
NEW QUESTION # 48
......
C_IBP_2305 Dumps are Available for Instant Access: https://www.real4prep.com/C_IBP_2305-exam.html
Valid C_IBP_2305 Dumps for Helping Passing C_IBP_2305 Exam!: https://drive.google.com/open?id=1KusHs9xE8cGUJQZk95OT8sVcNgsAOb4g