Quickly and Easily Pass CrowdStrike Exam with CCFA-200b real Dumps Updated on Dec-2025
Realistic CCFA-200b Dumps Questions To Gain Brilliant Result
NEW QUESTION # 128
While a host is Network contained, you need to allow the host to access internal network resources on specific IP addresses to perform patching and remediation. Which configuration would you choose?
- A. Configure a Containment Policy with the entire internal IP CIDR block
- B. Configure the Host firewall to allowlist the specific IP addresses
- C. Configure a Containment Policy with the specific IP addresses
- D. Configure a Real Time Response policy allowlist with the specific IP addresses
Answer: C
Explanation:
While a host is Network contained, the administrator can allow the host to access internal network resources on specific IP addresses to perform patching and remediation by configuring a Containment Policy with the specific IP addresses. This policy allows users to specify which ports, protocols and IP addresses are allowed or blocked during network containment. The other options are either incorrect or not related to network containment.
NEW QUESTION # 129
An analyst has reported they are not receiving workflow triggered notifications in the past few days.
Where should you first check for potential failures?
- A. Custom Alert History
- B. Workflow Audit log
- C. Workflow Execution log
- D. Falcon UI Audit Trail
Answer: C
Explanation:
The Workflow Execution log in the Workflow Management option allows you to view the status and results of workflow executions triggered by detection events. You can filter the log by workflow name, status, start and end time, and detection ID. You can also view the details of each execution, including the actions performed, the output received, and any errors encountered. This log can help you troubleshoot potential failures or issues with your workflows.
NEW QUESTION # 130
Your organization wants to monitor the use of remote access software that is currently authorized. The executable is called remote.exe.
How would you trigger a detection for review of any process named remote.exe?
- A. Write a scheduled search looking for ProcessRollup2 events for remote.exe
- B. Assign an aggressive detection level machine-learning prevention policy to the applicable hosts
- C. Create an exclusion for remote.exe and set a workflow to email you every time the exclusion is used
- D. Write an IOA rule to monitor process creation of .*\\remote\.exe
Answer: D
NEW QUESTION # 131
Which exclusion pattern will prevent detections on a file at C:\Program Files\My Program\My Files\program.exe?
- A. \Program Files\My Program\My Files\*
- B. *\*
- C. \Program Files\My Program\*
- D. *\Program Files\My Program\*\
Answer: A
Explanation:
The exclusion pattern that will prevent detections on a file at C:\Program Files\My Program\My Files\program.exe is \Program Files\My Program\My Files*. This pattern will match any file under the My Files folder, including program.exe, and exclude them from detections. The other patterns are either incorrect or too broad to prevent detections on this specific file.
NEW QUESTION # 132
An administrator creating an exclusion is limited to applying a rule to how many groups of hosts?
- A. Each exclusion can be aligned to only one group of hosts
- B. File exclusions are not aligned to groups or hosts
- C. There is no limit and exclusions can be applied to any or all groups
- D. There is a limit of three groups of hosts applied to any exclusion
Answer: C
Explanation:
An exclusion is a rule that tells the Falcon platform to ignore certain files, folders, processes, or registry keys when performing prevention or detection actions. An administrator can create an exclusion and apply it to one or more groups of hosts, or to all hosts in the organization. For example, an administrator can create an exclusion for a legitimate application that is causing false positives and apply it to the group of hosts that are running that application.
NEW QUESTION # 133
How many days will an inactive host remain visible within the Host Management or Trash pages?
- A. 90 days
- B. 45 days
- C. 120 days
- D. 15 days
Answer: A
Explanation:
An inactive host will remain visible within the Host Management or Trash pages for 90 days. An inactive host is a host that has not communicated with the Falcon platform for more than seven days. An inactive host will be moved from the Host Management page to the Trash page after seven days of inactivity. An inactive host will remain in the Trash page for 90 days before being permanently deleted from the Falcon platform. You can restore an inactive host from the Trash page if it becomes active again within 90 days.
NEW QUESTION # 134
You need to export a list of all deletions for a specific Host Name in the last 24 hours. What is the best way to do this?
- A. Go to Host Management in the Host page. Select the host and use the Export Detections button
- B. Utilize the Detection Resolution Dashboard. Use the filters to focus on the appropriate hostname and time, then export the results from the "Detection Resolution History" section
- C. Utilize the Detection Activity Dashboard. Use the filters to focus on the appropriate hostname and time, then export the results from the "Detections by Host" section
- D. In the Investigate module, access the Detection Activity page. Use the filters to focus on the appropriate hostname and time, then export the results
Answer: D
Explanation:
The best way to export a list of all deletions for a specific Host Name in the last 24 hours is to go to the Investigate module, access the Detection Activity page, use the filters to focus on the appropriate hostname and time, then export the results. This will allow you to download a CSV file that contains information about all the detections that were deleted for that host in that time period. The other options are either incorrect or not related to exporting deletions.
NEW QUESTION # 135
The Falcon Administrator has created a new prevention policy to apply to the "Servers" group; however, when applying the new prevention policy this group is not appearing in the list of available groups. What is the most likely issue?
- A. Host type was not defined correctly within the prevention policy
- B. The "Servers" group already has a policy applied to it
- C. The new prevention policy should be enabled first
- D. The "Servers" group must be disabled first
Answer: B
Explanation:
The most likely issue for not being able to apply a new prevention policy to the "Servers" group is that the "Servers" group already has a policy applied to it. A prevention policy is a policy that defines the prevention capabilities and settings for the Falcon sensor on a host. You can create and assign custom prevention policies to different hosts or groups in your environment. However, you can only assign one prevention policy per host or group at a time. If a host or group already has a prevention policy applied to it, you cannot apply another prevention policy to it unless you remove or replace the existing one.
NEW QUESTION # 136
What command should be run to verify if a Windows sensor is running?
- A. netstat -f
- B. ps -ef | grep falcon
- C. sc query csagent
- D. regedit myfile.reg
Answer: C
Explanation:
The command that should be run to verify if a Windows sensor is running is sc query csagent.
This command will display the status and information of the csagent service, which is the Falcon sensor service. The other commands are either incorrect or not applicable to Windows sensors.
NEW QUESTION # 137
You have a Windows host on your network in Reduced functionality mode (RFM). While the system is in RFM, which of the following is TRUE?
- A. Some detection patterns and preventions will not be triggered
- B. Prevention patterns will not be triggered
- C. System monitoring will be unavailable
- D. Event reporting will be unavailable
Answer: A
Explanation:
The option that is true when a Windows host is in Reduced Functionality Mode (RFM) is that some detection patterns and preventions will not be triggered. RFM is a mode that limits the sensor's functionality due to license expiration, network connectivity loss, or certificate validation failure. When a Windows sensor is in RFM, it will only provide basic prevention capabilities, such as blocking known malware hashes and preventing script execution from the %TEMP% directory.
The sensor will not send any telemetry or detection events to the Falcon platform, and will not receive any policy or update changes from the Falcon cloud. This means that some detection patterns and preventions that rely on telemetry, machine learning, or cloud analysis will not be triggered.
NEW QUESTION # 138
On which page of the Falcon console can one locate the Customer ID (CID)?
- A. Sensor Dashboard
- B. Hosts Management
- C. Sensor Downloads
- D. API Clients and Keys
Answer: D
Explanation:
The page of the Falcon console where one can locate the Customer ID (CID) is API Clients and Keys. The API Clients and Keys page allows you to create and manage API clients and keys for accessing the Falcon platform programmatically. The Customer ID (CID) is a unique identifier for your organization that is required for authenticating your API requests. You can find your CID at the top of the API Clients and Keys page.
NEW QUESTION # 139
What sensor update policy will a sensor receive if it does not have a host group assignment?
- A. They don't get a policy
- B. Auto N-1 policy
- C. The default policy
- D. Auto N-2 policy
Answer: C
NEW QUESTION # 140
Under the "Next-Gen Antivirus: Cloud Machine Learning" setting there are two categories, one of them is "Cloud Anti-Malware" and the other is:
- A. Adware & PUP
- B. Advanced Machine Learning
- C. Execution Blocking
- D. Sensor Anti-Malware
Answer: A
Explanation:
With EDR license, if you go to "Audit logs > Machine-learning prevention monitoring", three options appear: Cloud Anti-malware, Sensor Anti-malware and Adware&PUP. Therefore, answer is A.
NEW QUESTION # 141
How would an installation token be configured if the Falcon Sensor was installed on a Red Hat Enterprise Linux host?
- A. sudo yum install --cid= --provisioning-token=ABCD1234
- B. sudo /opt/CrowdStrike/falconctl -s -t ABCD1234
- C. You will be prompted to enter the installation token during the install if it is required
- D. sudo /opt/CrowdStrike/falconctl -s --cid= --provisioning-token=ABCD1234
Answer: D
NEW QUESTION # 142
You will be testing detections with pentest and security tooling on your host.
How can a workflow be created to automatically assign any detection related to your pentest to yourself in real time?
- A. Create a workflow to disable detections for your host until testing is done
- B. Create an Event trigger workflow that triggers on an EPP Detection with conditions looking for the desired hostname. The Action will then assign the detection to yourself.
- C. Create a scheduled workflow to run once a day that triggers on an EPP Detection with conditions looking for the desired hostname. The Action will then assign the detection to yourself.
- D. Create an Event trigger workflow that triggers on an EPP Detection with an action to assign the detection to yourself
Answer: B
NEW QUESTION # 143
Which role allows a user to connect to hosts using Real-Time Response?
- A. Prevention Hashes Manager
- B. Falcon Administrator
- C. Real Time Responder ?Active Responder
- D. Endpoint Manager
Answer: C
Explanation:
The role that allows a user to connect to hosts using Real-Time Response is Real Time Responder ?Active Responder. This role allows users to use the "Connect to Host" feature to gather additional information from the host, as well as execute commands and scripts on the host. The other roles do not have this capability.
NEW QUESTION # 144
What are the required components to manually install Falcon Sensor on MacOS?
- A. Falcon package, system extension, Full Disk Access, network filter extension
- B. System extension, Full Disk Access, network filter extension
- C. Falcon package, Full Disk Access, network filter extension
- D. Falcon package, system extension, Full Disk Access
Answer: A
NEW QUESTION # 145
What is the purpose of using groups with Sensor Update policies in CrowdStrike Falcon?
- A. To group hosts with others in the same business unit
- B. To prioritize the order in which Falcon updates are installed, so that updates are not installed all at once leading to network congestion
- C. To allow the controlled assignment of sensor versions onto specific hosts
- D. To group hosts according to the order in which Falcon was installed, so that updates are installed in the same order every time
Answer: C
Explanation:
The purpose of using groups with Sensor Update policies in CrowdStrike Falcon is to allow the controlled assignment of sensor versions onto specific hosts. This allows users to manage the sensor updates for different hosts based on their needs and preferences, such as testing, staging or production. The other options are either incorrect or not related to using groups with Sensor Update policies.
NEW QUESTION # 146
A member of your SECOPS team currently has the role of Falcon Security Lead to be able to Manage detections, quarantine files and reset user credentials. Which additional role is required to also allow them to view and modify remediation actions?
- A. Remediation Manager
- B. Quarantine Manager
- C. Detections Exception Manager
- D. Endpoint Manager
Answer: A
NEW QUESTION # 147
You are beginning the rollout of the Falcon Sensor for the first time side-by-side with your existing security solution. You need to configure the Machine Learning levels of the Prevention Policy so it does not interfere with existing solutions during the testing phase. What settings do you choose?
- A. Detection slider: Disabled
Prevention slider: Disabled - B. Detection slider: Cautious
Prevention slider: Cautious - C. Detection slider: Extra Aggressive
Prevention slider: Cautious - D. Detection slider: Moderate
Prevention slider: Disabled
Answer: B
Explanation:
Explanation:The best settings to configure the Machine Learning levels of the Prevention Policy so it does not interfere with existing solutions during the testing phase are Cautious for both Detection and Prevention sliders. This setting will enable the sensor to detect and prevent only high-confidence malicious events, while allowing low-confidence events to run without interference. This setting will also generate less noise and false positives than higher settings, such as Moderate or Extra Aggressive.
NEW QUESTION # 148
You have a member of your SECOPS team that is building custom scripts for your environment and they cannot save or share them in Falcon. What additional role do they need to be able accomplish this?
- A. Real Time Response - Administrator
- B. All Real Time Response roles can do this
- C. Real Time Responde - Active Responder
- D. Falcon Scripts Manager
Answer: D
NEW QUESTION # 149
Where would you apply a configuration to allow IP addresses over which your hosts will always be allowed to communicate, even if a host is contained?
- A. IP Allowlist Management
- B. Response Policies
- C. Maintenance Token
- D. Containment Policy
Answer: D
NEW QUESTION # 150
You have determined that you have numerous Machine Learning detections in your environment that are false positives. They are caused by a single binary that was custom written by a vendor for you and that binary is running on many endpoints. What is the best way to prevent these in the future?
- A. Using IOC Management, add the hash of the binary in question and set the action to "Allow"
- B. Contact support and request that they modify the Machine Learning settings to no longer include this detection
- C. Using IOC Management, add the hash of the binary in question and set the action to "Block, hide detection"
- D. Using IOC Management, add the hash of the binary in question and set the action to "No Action"
Answer: A
Explanation:
to match any number of characters including none while not matching beyond path separators (\ or /) and double asterisks are used to recursively match zero or more directories that fall under the current directory.
NEW QUESTION # 151
What could cause your Windows host to be in Reduced Functionality Mode (RFM)?
- A. The host lost internet connectivity
- B. A misconfiguration in your prevention policy
- C. Crowdstrike has not certified the latest Windows update
- D. A sensor update policy was misconfigured
Answer: C
NEW QUESTION # 152
How can a API client secret be viewed after it has been created?
- A. The API client secret can be provided by support via direct email request from a Falcon Administrator
- B. Selecting "show secret" within the 3-dot dropdown menu will reveal the secret for the selected api client
- C. Within the API management page, API client secrets can be accessed within the "edit client" functionality
- D. The API client secret must be reset or a new client created as the secret cannot be viewed after it has been created
Answer: D
Explanation:
The way an API client secret can be viewed after it has been created is that the API client secret must be reset or a new client created as the secret cannot be viewed after it has been created.
As explained in question 137, an API client secret is only displayed once during creation for security reasons. If you lose or forget your API client secret, you cannot view it again in the Falcon console. You have two options to resolve this issue: either reset your API client secret or create a new API client. Resetting your API client secret will generate a new secret for your existing API client, which will invalidate any previous secret. Creating a new API client will generate a new API client ID and secret, which will require you to update any applications or scripts that use the Falcon APIs.
NEW QUESTION # 153
......
Start your CCFA-200b Exam Questions Preparation: https://www.real4prep.com/CCFA-200b-exam.html
A Fully Updated CCFA-200b Exam Dumps - PDF Questions and Testing Engine: https://drive.google.com/open?id=1paBOWkhxjWmpSIXeMJzJoyOK86PMF7Xl