[Sep 05, 2025] Get New A10-System-Administration Practice Test Questions Answers
A10-System-Administration Dumps and Exam Test Engine
A10 Networks A10-System-Administration exam is a certification program designed for IT professionals who want to validate their skills and knowledge in system administration. A10-System-Administration exam is administered by A10 Networks, a leading provider of advanced application delivery controllers and security solutions. The A10-System-Administration exam is part of the A10 Certified Professional program, which is designed to enable IT professionals to demonstrate their proficiency in A10 Networks technologies and solutions.
A10 Networks A10-System-Administration exam is ideal for network administrators, system administrators, and network engineers who are responsible for managing and maintaining A10 Networks’ ADCs. A10-System-Administration exam is also suitable for professionals who want to enhance their knowledge and skills in the field of application delivery controllers and network infrastructure.
NEW QUESTION # 15
Given the following "show vcs summary" output, which statements are true about the virtual chassis set?
(Choose three.)
- A. The aVCS vMaster of the set can always be accessed at IP Address 224.0.0.210.
- B. Three devices were configured as part of the virtual chassis.
- C. The command was run from the aVCS vMaster.
- D. The command was run from device 3 of the set.
- E. This is aVCS set-id 1.
- F. The aVCS vMaster of the group can always be accessed at IP Address 1.0.0.1.
Answer: B,D,E
NEW QUESTION # 16
Which VRID priority scheme will implement an Active-Active-Active VRRP-A deployment with three ACOS devices?
- A. 0
- B. 1
- C. 2
Answer: B
NEW QUESTION # 17
Device 1 is the vMaster in a virtual chassis. Select the command set that adds an IP address to VE interface
200 on device 3?
- A. interface ve 200 device 3 ip address 198.162.4.1 /24
- B. vcs device-context device 3 interface ve 200 ip address 198.162.4.1 /24
- C. interface ve 3/200 ip address 198.162.4.1 /24
- D. interface device-context 3 interface ve 200 ip address 198.162.4.1 /24
Answer: C
NEW QUESTION # 18
What do we know about the state of the system from the CLI prompt? (Choose two.) A1-vMaster[1/1][Helium2]#
- A. There are at least 2 private partitions configured.
- B. There is only 1 member in this A10 Virtual Chassis.
- C. aVCS has been configured, and this host is part of aVCS set 1/1.
- D. aVCS has been configured, and this host is part of aVCS set 1.
- E. Application Delivery Partitions have been configured.
Answer: C,E
NEW QUESTION # 19
When private partitions are created on a device where VRRP-A is enabled, which statement is true?
- A. All VRIDs on the shared partition are replicated on the private partitions.
- B. No VRIDs are configured on a private partition until explicitly configured.
- C. VRID 0 is configured with settings identical to VRID 0 on the shared partition.
- D. VRRP-A is not available on private partitions.
- E. VRID 0 is configured with its default settings.
Answer: E
NEW QUESTION # 20
Which statement correctly describes the result of the following commands?
ACOS(config)#logging host 192.168.216.45
ACOs(config)#end
ACOS#active-partition p1
Currently active partition: p1
ACOS[p1](config)#logging host 2.2.2.2
ACOS[p1](config)#logging host partition shared
- A. System logs generated from partition "p1" will be sent to the shared logging server's "192.168.216.45".
- B. System logs generated from partition "p1" will be sent to logging server "2.2.2.2", and only warning severity log messages are sent to the shared logging server's "192.168.216.45".
- C. System logs generated from partition "p1" will be sent to logging server "2.2.2.2".
- D. System logs generated from partition "p1" will be sent to logging server "2.2.2.2", as well as to the shared logging server's "192.168.216.45".
Answer: D
NEW QUESTION # 21
When vBlade A issues a "vcs vmaster-take-over 200" command, which statement is true?
- A. The command is ignored when the current vMaster is in vMaster maintenance mode.
- B. If an administrator on vBlade B were to simultaneously issue command vcs vmaster-take-over 210, vBlade B would become the vMaster.
- C. Any subsequent vmaster-take-over command within the chassis with a parameter smaller than 201 is ignored.
- D. The 200 priority is compared to the current vmaster's default vrid priority to determine which device controls the chassis.
Answer: D
NEW QUESTION # 22
In the following configuration:
Where network 3.0.0.x on each device is on a VE interface dedicated to aVCS traffic, what must you do to ensure that command "device-context x" always succeeds?
- A. Verify the interface is untagged on each device.
- B. Enable management service ssh on that interface for each device.
- C. Apply acl "permit 3.0.0.0 /24" on that interface for each device.
- D. Configure vcs floating-ip on network 3.0.0.0 /24.
Answer: D
NEW QUESTION # 23
What information is typically submitted with every aXAPI call after the initial login is complete?
- A. Authorization header with signature
- B. Log file location
- C. The AXAPI special permission XML file
- D. The ACOS device serial number
- E. The programming language being used
Answer: A
NEW QUESTION # 24
Given the following VRID 2 configuration, which device will host the VRID after the three devices at the same time?
- A. The VRID will be hosted on all three devices at the same time.
- B. Device 2
- C. VCS will randomly assign the VRID to a device based on the uptime of the device.
- D. Device 3
- E. Device 1
Answer: E
NEW QUESTION # 25
The "show admin" displays the following output. Select the correct statements concerning admins on this device. (Choose two.)
- A. Sally is a read write administrator on the Acme partition.
- B. Sally can only log in with the web client.
- C. Fred is a read write administrator on the Acme partition.
- D. Sally is a read write administrator on the shared partition.
- E. Fred can run aXAPI scripts against the acme partition using his login information.
- F. User admin has no access to the acme partition.
- G. Fred can only log in with the web or api client.
Answer: A,G
NEW QUESTION # 26
You are planning an Active-Active-Active VRRP-A three-device deployment that, upon failover of any device, distributes the load from a single device to both standby devices simultaneously. How many VRIDs are required?
- A. 0
- B. 1
- C. 2
- D. 3
- E. VRID Default is enough
- F. 4
Answer: C
NEW QUESTION # 27
......
2025 New Real4Prep A10-System-Administration PDF Recently Updated Questions: https://www.real4prep.com/A10-System-Administration-exam.html
A10 Networks A10-System-Administration DUMPS WITH REAL EXAM QUESTIONS: https://drive.google.com/open?id=1tERwbC1201xiXK4DP1-euZ-W47wEyj4v