[Sep-2021] Valid Way To Pass Fortinet Exam Dumps with NSE6_FNC-8.5 Exam Study Guide
All NSE6_FNC-8.5 Dumps and Fortinet NSE 6 - FortiNAC 8.5 Training Courses Help candidates to study and pass the Exams hassle-free!
NEW QUESTION 12
Which two methods can be used to gather a list of installed applications and application details from a host?
(Choose two)
- A. Application layer traffic inspection
- B. MDM integration
- C. Portal page on-boarding options
- D. Agent technology
Answer: B,C
NEW QUESTION 13
During the on-boarding process through the captive portal, why would a host that successfully registered remain stuck in the Registration VLAN? (Choose two.)
- A. Bridging is enabled on the host
- B. The wrong agent is installed.
- C. The ports default VLAN is the same as the Registration VLAN.
- D. There is another unregistered host on the same port.
Answer: B,C
NEW QUESTION 14
Where do you look to determine what network access policy, if any, is being applied to a particular host?
- A. The Policy Details view for the host
- B. The Port Properties view of the hosts port
- C. The Policy Logs view
- D. The network access policy configuration
Answer: D
NEW QUESTION 15
With enforcement for network access policies and at-risk hosts enabled, what will happen if a host matches a network access policy and has a state of "at risk"?
- A. The host is provisioned based on the default access defined by the point of connection.
- B. The host is provisioned based on the network access policy.
- C. The host is administratively disabled.
- D. The host is isolated.
Answer: B
NEW QUESTION 16
What capability do logical networks provide?
- A. Autopopulation of device groups based on point of connection
- B. Interactive topology view diagrams
- C. Application of different access values from a single access policy
- D. VLAN-based inventory reporting
Answer: C
NEW QUESTION 17
What capability do logical networks provide?
- A. Autopopulation of device groups based on point of connection
- B. VLAN-based inventory reporting
- C. Application of different access values from a single access policy
- D. Interactive topology view diagrams
Answer: B
Explanation:
NTM also includes reporting utilities such as network and inventory reports. You can generate reports for subnets, switch ports, and VLANs.
Reference: https://logicalread.com/network-diagram/#.YBk9ZOgzbIU
NEW QUESTION 18
Which command line shell and scripting language does FortiNAC use for WinRM?
- A. DOS
- B. Powershell
- C. Linux
- D. Bash
Answer: B
Explanation:
Explanation
Open Windows PowerShell or a command prompt. Run the following command to determine if you already have WinRM over HTTPS configured.
NEW QUESTION 19
Which three communication methods are used by the FortiNAC to gather information from, and control, infrastructure devices? (Choose three)
- A. DCLI
- B. SNMP
- C. RADIUS
- D. FTP
- E. SMTP
Answer: B,C,D
Explanation:
Explanation
Set up SNMP communication with FortiNAC
RADIUS Server that is used by FortiNAC to communicate
FortiNAC can be configured via CLI to use HTTP or HTTPS for OS updates instead of FTP.
NEW QUESTION 20
What would happen if a port was placed in both the Forced Registration and the Forced Remediation port groups?
- A. Only al-risk hosts would be impacted.
- B. Both types of enforcement would be applied.
- C. Both enforcement groups cannot contain the same port.
- D. Only rogue hosts would be impacted.
Answer: D
NEW QUESTION 21
In an isolation VLAN. which three services does FortiNAC supply? (Choose three.)
- A. IDHCP
- B. Web
- C. DNTP
- D. DDNS
- E. SMTP
Answer: B,C,D
NEW QUESTION 22
What capability do logical networks provide?
- A. Autopopulation of device groups based on point of connection
- B. VLAN-based inventory reporting
- C. Application of different access values from a single access policy
- D. Interactive topology view diagrams
Answer: B
Explanation:
Explanation
NTM also includes reporting utilities such as network and inventory reports. You can generate reports for subnets, switch ports, and VLANs.
NEW QUESTION 23
Refer to the exhibit, and then answer the question below.
Which host is rogue?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
Explanation:
Explanation
Explanation/Reference: https://docs.fortinet.com/document/fortinac/8.6.0/administration-guide/283146/evaluating- rogue-hosts
NEW QUESTION 24
What would happen if a port was placed in both the Forced Registration and the Forced Remediation port groups?
- A. Only at-risk hosts would be impacted.
- B. Both enforcement groups cannot contain the same port.
- C. Both types of enforcement would be applied.
- D. Only rogue hosts would be impacted.
Answer: B
Explanation:
Explanation/Reference: https://docs.fortinet.com/document/fortinac/8.3.0/administration-guide/837785/system-groups
NEW QUESTION 25
Which agent can receive and display messages from FortiNAC to the end user?
- A. Dissolvable
- B. Passive
- C. Persistent
- D. MDM
Answer: B
NEW QUESTION 26
In a wireless integration, how does FortiNAC obtain connecting MAC address information?
- A. MAC notification traps
- B. RADIUS
- C. End station traffic monitoring
- D. Link traps
Answer: B
Explanation:
Explanation
Intelligent Access Points (IAPs) and controllers support two methods of RADIUS based authentication:
RADIUS MAC authentication and 802.1x authentication.
NEW QUESTION 27
Refer to the exhibit, and then answer the question below.
Which host is rogue?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION 28
Which connecting endpoints are evaluated against all enabled device profiling rules?
- A. All hosts, each time they connect
- B. Known trusted devices each time they change location
- C. Rogues devices, only when they connect for the first time
- D. Rogues devices, each time they connect
Answer: B
Explanation:
Explanation
FortiNAC process to classify rogue devices and create an organized inventory of known trusted registered devices.
NEW QUESTION 29
......
Get Latest [Sep-2021] Conduct effective penetration tests using Real4Prep NSE6_FNC-8.5