[2026] Get Top-Rated Cisco 350-801 Exam Dumps Now
Passing Key To Getting 350-801 Certified Exam Engine PDF
Cisco 350-801 exam covers a wide range of topics, including Cisco Unified Communications Manager (CUCM), Cisco Unity Connection, Cisco Unified IM and Presence, and Cisco Expressway. 350-801 exam also tests the candidate's knowledge of SIP and H.323 protocols, as well as the ability to troubleshoot Cisco Collaboration solutions.
NEW QUESTION # 23
What is required for Cisco UCM to accept SIP calls with a URI in the format of "sip
[email protected]"?
- A. Set the SIPS URI Handling to True in CallManager Service Parameters.
- B. Change the Destination Address to a Fully Qualified Domain Name on the SIP trunk.
- C. Define Cluster Fully Qualified Domain Name under Servers in Cisco UCM.
- D. Define Cluster Fully Qualified Domain Name in Enterprise Parameters.
Answer: D
Explanation:
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/12_0_1/systemConfig/cucm_ b_system-configuration-guide-1201/cucm_b_system- configuration-guide-
1201_chapter_0101.html
NEW QUESTION # 24
Which data security feature is included with the Pro Pack for Cisco Webex Control Hub?
- A. encryption in transit
- B. end-to-end encryption of content
- C. end-to-end encryption for meetings
- D. Hybrid Data Security
Answer: D
NEW QUESTION # 25
A company wants to provide remote users with access to its on-premises Cisco collaboration features.
Which components are required to enable Cisco Mobile and Remote Access for the users?
- A. Cisco Unified Border Element, Cisco IM and Presence Server, and Cisco Video Communication Server
- B. Cisco Expressway-E, Cisco Expressway-C, and Cisco UCM
- C. Cisco Expressway-E, Cisco IM and Presence Server, and Cisco Video Communication Server
- D. Cisco Unified Border Element, Cisco UCM, and Cisco Video Communication Server
Answer: B
Explanation:
https://www.cisco.com/c/en/us/td/docs/solutions/CVD/Collaboration/enterprise/12x/120/collbcvd/e dge.html
NEW QUESTION # 26
Which DTMF relay method configured on a SIP dial-peer will ensure that a media resource is not invoked by Unified CM for calls to UCCX IVRs?
- A. dtmf-relay sip-notify
- B. sdtmf-relay h245-slgnal
- C. dtmf-relay rtp-nte
- D. dtmf-relay slp-kpml
Answer: D
Explanation:
UCCX only supports out-of-band DTMF. This can be applied at the CUBE to avoid a media resource being needed to address as it can directly handle the DTMF relay from RTP-NTE to SIP-KPML
https://www.cisco.com/c/dam/en/us/td/docs/ios-
xml/ios/voice/cube_uccx/cube_uccx_interop_bestprac_guide.pdf
NEW QUESTION # 27
What is a function of a call handler in Cisco Unity Connection?
- A. It answers calls, take messages, and provide menus of options.
- B. It provides access to a corporate directory by playing an audio list that users and outside callers use to reach users and leave messages.
- C. It collects information from callers by playing a series of questions and recording the answers.
- D. It controls outgoing calls by allowing an administrator to specify the numbers that Cisco Unity Connection dials to transfer calls, notify users of messages, and deliver faxes
Answer: A
NEW QUESTION # 28
What is a description of the DiffServ model used for implementing QoS?
- A. AF41 has higher drop precedence than AF42, which has higher drop precedence than AF43.
- B. Voice and video calls are marked with different DSCP values and placed in different queues.
- C. RTP traffic from voice and video calls is marked EF and placed in the same queue.
- D. AF43 has higher drop precedence than AF42 but lower drop precedence than AF41.
Answer: B
Explanation:
https://www.cisco.com/c/en/us/support/docs/quality-of-service-qos/qos-packet-marking/10103- dscpvalues.html
NEW QUESTION # 29
Refer to the Exhibit.
Which command is required to allow this media resource to handle Video Media streams?
- A. maximum sessions hardware 50
- B. associate application Cisco Unified Border Element
- C. video codec h264
- D. codec pass-through
Answer: C
NEW QUESTION # 30
A collaboration engineer must configure Cisco Unified Border Element to support up to five concurrent outbound calls across an Ethernet Link with a bandwidth of 160 kb to the Internet Telephony service provider. Which set of commands allows the engineer to complete the task without compromising voice quality?
A)
B)
C)
D)
- A. Option A
- B. Option B
- C. Option D
- D. Option C
Answer: B
NEW QUESTION # 31
An engineer is deploying Webex app on Microsoft Windows computers. The engineer wants to ensure that the end users do not receive pop-IQ dialogues %'hen they start the application 'Much two actions ensure the end users are not promted to accept the end-user license (Choose two )
- A. Set the "/quiet installation argument
- B. Set the DEFAULT^'THEMEs-Dark"" installation argument
- C. Set the "HKEY_LCX^M._MACHINE .SoftwareCiscoCollabHostEula Setting registry Eula_disable
- D. Set the "HKEY_LOCAL_MACHINE,.Software's WOW6432Node .CiscoCollabHost -Eula_disable
- E. Set the DELETEUSERDATA=r installation argument
Answer: C,D
Explanation:
The correct answers are B and C.
To ensure that end users are not prompted to accept the end-user license agreement (EULA) when they start the Webex app, the engineer must set the following two registry keys:
* HKEY_LOCAL_MACHINE\Software\WOW6432Node\CiscoCollabHost\Eula_disable
* HKEY_LOCAL_MACHINE\Software\CiscoCollabHost\Eula Setting\Eula_disable Setting these registry keys will disable the EULA prompt for all users who start the Webex app.
The other options are not valid actions to ensure that end users are not prompted to accept the EULA.
NEW QUESTION # 32
Due to service provider restriction. Cisco UCM cannot send video in the SDR Which two options on Cisco UCM are configured to suppress video in the SDP in outgoing invites? (Choose two.)
- A. Set Video Bandwidth in the Region settings to 0.
- B. Add the audio forced command to voice service VoIP on the Cisco Unified Border Element.
- C. Change the Video Capabilities dropdown on the endpoint to Disabled.
- D. Check the Send send-receive SDP in mid-call INVITE check box on the SIP trunk SIP profile.
- E. Check the Retry Video Call as Audio on the SIP trunk.
Answer: A,C
NEW QUESTION # 33
Refer to the exhibit.
An engineer verifies the configured of an MGCP gateway. The commands are already configured. Which command is necessary to enable MGCP?
- A. Device (config) # com-manager active
- B. Device (config)# mgcp
- C. Device(config)# ccm-manager enable
- D. Device(config)# mgcp enable
Answer: B
NEW QUESTION # 34
Which DiffServ value must be used to identify and classify audio and video from Cisco Telepresence endpoints according to the Cisco dual video queue approach?
- A. AF42
- B. CS3
- C. AF41
- D. CS4
Answer: D
NEW QUESTION # 35
Where is it recommended to enforce the QoS trust boundary on a network?
- A. LAN access egress
- B. LAN access ingress
- C. LAN access egress and the WAN access egress
- D. LAN access ingress and the WAN access ingress
Answer: D
NEW QUESTION # 36
Refer to the exhibit.
Refer to the exhibit. The SDP offer/answer has been completed successfully but there is no DTMF when users press keys. What is the cause of the issue?
- A. DTMF was negotiated property in these messages.
- B. Payload type 110 was negotiated rather than type 101.
- C. DTMF was not negotiated on the call.
- D. G.729 rather than G.711ulaw was negotiated.
Answer: C
NEW QUESTION # 37
Refer to the exhibit.
https://i.postimg.cc/C57TkczG/image.png
A call is falling to establish between two SIP Devices The called device answers with these SOP Which SOP parameter causes issue?
- A. The payload for G.711ulaw must be 18.
- B. The RTP port is set to 0.
- C. The calling device did not offer a ptime value
- D. The media stream is set to send only
Answer: B
Explanation:
a) The calling device did not offer a ptime value: The ptime value is used to specify the amount of time between each media packet. If the calling device does not offer a ptime value, the called device will use the default value of 20 milliseconds.
b) The media stream is set to sendonly: The media stream is set to sendonly when the called device is only able to send media packets, and not receive them. This is not a problem, and the call will still succeed.
c) The payload for G.711ulaw must be 18: The payload for G.711ulaw is the type of media packet that is used. The payload must be set to 18 for G.711ulaw, but this is not a problem, and the call will still succeed.
Explanation:
The RTP port is used to send and receive media packets during a call. If the RTP port is set to 0, the called device will not be able to send or receive media packets, and the call will fail.
The other options are not correct because:
NEW QUESTION # 38
Which DHCP option must be set up for new phones to obtain the TFTP server IP address?
- A. option 120
- B. option 6
- C. option 15
- D. option 66
Answer: D
Explanation:
Section: Infrastructure and Design
Explanation/Reference: https://blog.router-switch.com/2013/03/dhcp-option-150-dhcp-option-66/
NEW QUESTION # 39
Refer to the exhibit. An engineer must implement toll fraud prevention on a Cisco UCM cluster by allowing only the indicated IP address and protocols through Cisco Unified Border Element. What must be configured?
- A.
- B.
- C.
- D.
Answer: C
NEW QUESTION # 40
Which two features does Mobile and Remote Access support in a Cisco collaboration solution? (Choose two.)
- A. multiple line registration
- B. Interactive Connectivity Establishment passthrough
- C. certificate provisioning to remote endpoints
- D. peer-to-peer file transfer
- E. all Cisco Unified Contact Center Express features
Answer: C
NEW QUESTION # 41
After an engineer implements the FAC and CMC features together, users report that calls take almost one minute to complete and that they occasionally hear the reorder tone.
Which two actions address this issue? (Choose two.)
- A. Do not wait for the tones immediately dial the FAC and CMC
- B. Advise the user to press the "#" button after dialling the FAC and CMC codes
- C. Change the code if the problem persists i/i-Advise the user to hang up and try again
- D. Adjust the T302 timer from the default of 15 seconds to 5 seconds to shorten the interdigit timer
Answer: B,D
NEW QUESTION # 42
What is the major difference between the two possible Cisco lM and Presence high-availability modes?
- A. Balanced mode provides user load balancing and user failover only for manually generated failovers. Active/standby mode provides anunconfigured standby node in the event of an outage, but it does not provide load balancing.
- B. Balanced mode does not provide user load balancing, but it provides user failover in the event of an outage. Active/standby mode provides analways on standby node in the event of an outage, but it does not provide load balancing.
- C. Balanced mode provides user load balancing and user failover in the event of an outage. Active/standby mode provides an always on standbynode in the event of an outage, but it does not provide load balancing.
- D. Balanced mode provides user load balancing and user failover in the event of an outage. Active/standby mode provides an always on standbynode in the event of an outage, and it also provides load balancing.
Answer: C
Explanation:
Balanced mode provides user load balancing and user failover in the event of an outage. Active/standby mode provides an always on standby node in the event of an outage, but it does not provide load balancing.
Here is a more detailed explanation of the two modes:
Balanced mode: In balanced mode, the IM and Presence Service nodes are configured to work together to provide high availability. The nodes are configured in a redundancy group, and the system automatically balances the load of users across the nodes in the group. If one of the nodes fails, the system automatically fails over the users to the other nodes in the group.
Active/standby mode: In active/standby mode, one of the IM and Presence Service nodes is designated as the active node, and the other nodes are designated as standby nodes. The active node handles all of the user traffic, and the standby nodes are only used if the active node fails. If the active node fails, the system automatically fails over to one of the standby nodes.
NEW QUESTION # 43
......
Cisco 350-801 exam is intended for professionals with experience in collaboration technologies, including network administrators, network engineers, and collaboration engineers. 350-801 exam is part of the CCNP Collaboration certification track and is a requirement for obtaining the CCNP Collaboration certification. 350-801 exam consists of 60-70 questions and has a time limit of 90 minutes. 350-801 exam questions are designed to test the candidate's knowledge and skills in implementing and operating Cisco Collaboration Core Technologies, and the candidate must score at least 750 out of 1000 to pass the exam.
Cisco 350-801 exam is a challenging exam that requires candidates to have a solid understanding of Cisco collaboration technologies. 350-801 exam consists of 60 to 70 multiple-choice questions and has a time limit of 90 minutes. To pass the exam, candidates must achieve a score of at least 825 out of 1000.
350-801 exam questions for practice in 2026 Updated 408 Questions: https://www.real4prep.com/350-801-exam.html
350-801 Exam Dumps Pass with Updated Tests Dumps: https://drive.google.com/open?id=19QQyDdwOZ8RM2asWC8IAdv6RDXFDQago