NS0-162 Free Exam Study Guide! (Updated 92 Questions)
NS0-162 Dumps for NetApp NCDA ONTAP Certified Exam Questions and Answer
NEW QUESTION # 53
Exhibit
You have a 4-node cluster.
How many ISCSI LIFs will be created from the SVM setup wizard, as shown in the exhibit?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
Explanation:
Explanation
The number of ISCSI LIFs that will be created from the SVM setup wizard, as shown in the exhibit, is 16.
This is because the LIFs per node field is set to 2, and there are 4 nodes in the cluster. Therefore, the total number of LIFs is 2 x 4 8 for each SVM, and since there are two SVMs, the total number of LIFs is 8 x 2 16.
The other options are incorrect because they do not match the calculation based on the exhibit. References
:- Configure an SVM for iSCSI, Configure iSCSI on an existing SVM
NEW QUESTION # 54
Click the Exhibit button.
A customer has an issue with performance on an NVMe solution. The SV Misusing all four ports shown
in the exhibit.
In this scenario, how would the customer improve the host performance?
- A. Remove support of the FC protocol and only use NVMe.
- B. Move all of the network interfaces to port 2a.
- C. Change the SFP+ in the controllers from 32 Gbps to 64 Gbps.
- D. Move some of the network interfaces from 2a to 2c and 2d.
Answer: D
NEW QUESTION # 55
Exhibit.
You are adding a NetApp AFF A400 system to an existing 4-node cluster and want to know which ports you would use to expand your cluster.
Referring to the exhibit, which tool would you use to accomplish this task?
- A. Active IQ Conflg Advisor
- B. NetApp Hardware Universe (HWU)
- C. Active 1Q Unified Manager
- D. NetApp Interoperability Matrix (IMT)
Answer: B
Explanation:
Explanation
The NetApp Hardware Universe (HWU) is a web-based tool that provides information about NetApp hardware products, including system specifications, supported configurations, and compatibility matrices. The HWU can help you determine which ports to use to expand your cluster by selecting your system model and viewing the available ports and their functions. You can also compare different models and generate reports based on your criteria. References :- NetApp Hardware Universe, Detailed guide - AFF A400
NEW QUESTION # 56
You want to monitor system performance in real time.
In this scenario, which two tools would you use to accomplish this task? (Choose two.)
- A. Active IQ Digital Advisor
- B. ONTAP CLI
- C. ONTAP System Manager
- D. Active IQ Unified Manager
Answer: B,C
NEW QUESTION # 57
Click the Exhibit button.
A customer has zoned switches to a host, but the host cannot see the LUNs.
Referring to the exhibit, what needs to be done to make the LUNs visible to the host?
- A. Zoning should be changed to use the 20:06:d0:39:ea:05:03:a3 and 20:08:d0:39:ea:05:03:a3 WWPNs.
- B. Ports on tme-a700 nodes 1 and 2 should have the fc_nvme protocol removed.
- C. Zoning should be changed to use the 50:0a:09:81:80:d2:c3:b8 and 50:0a:09:81:42:c2:b9 WWPNs.
- D. The customer should remove the switches and directly connect the host to the controller ports.
Answer: A
NEW QUESTION # 58
You attempt to create an SVM for CIFS access only.
In this scenario, which three actions must be performed to Join the existing Active Directory? (Choose three.)
- A. Create NTP entries.
- B. Create a cluster LIF.
- C. Create DNS entries.
- D. Create export policies.
- E. Create a data LIF.
Answer: A,C,E
Explanation:
Explanation
To join an SVM for CIFS access only to an existing Active Directory domain, you need to perform the following actions:
Domain Name System
https://www.bing.com/th?id=OSK.f5253ff08ae8fc6a14f49b4fd0be7757&pid=cdx&w=161&h=128&c=7
Create DNS entries for the SVM name and the data LIF IP address on the DNS server that is authoritative for the domain. This enables the domain controller to resolve the SVM name and the data LIF IP address.
Create a data LIF on the SVM that will be used by the CIFS clients to access the data. The data LIF must have an IP address that belongs to the same subnet as the domain controller or a routable subnet.
Create NTP entries for the SVM to synchronize the time with the domain controller. The time difference between the SVM and the domain controller must be within five minutes, otherwise the domain join operation will fail.
You do not need to create export policies or cluster LIFs for CIFS access only. References :- Join a SVM to an Active Directory domain, Create a new SVM with a CIFS volume and share, ONTAP - Joining an SVM to an Active Directory domain
NEW QUESTION # 59
Exhibit.
A Linux host with the 10.0.1.24 IP address is unable to mount the VOL_A volume using NFSv3.
Referring to the exhibit, what is the problem?
- A. The host IP address does not match the export policy rule.
- B. The logical Interface does not allow the NFSv3 protocol.
- C. The volume is in read-only.
- D. The volume is not mounted In the namespace.
Answer: D
Explanation:
The volume is not mounted in the namespace. https://docs.netapp.com/ontap-9/index.jsp?topic=%2Fcom.netapp.doc.cdot-famg-nfs%2FGUID-8E400D78-B405-4682-8F33-143783F2D580.html Even if the volume was read only it could be mounted - also the client IP is in the desired range and LIF is configured for NFS.
NEW QUESTION # 60
After creating an SVM In an ONTAP cluster, you are asked to delegate administration of the newly created SVM to an SVM administrator. In this scenario, which two tasks must you complete? (Choose two.)
- A. Create the vsadmin user account in the new SVM.
- B. Configure role-based access control (RBAC) for the vsadmin user account.
- C. Set a password for (the vsadmin user account.
- D. Create a LIF for SVM management.
Answer: A,C
NEW QUESTION # 61
A customer wants to migrate a series of LUNs from a third-party array to a FAS. In this scenario, which two tools would the customer use? (Choose two.)
- A. ADP
- B. XCP
- C. NKS
- D. FLI
Answer: B,D
Explanation:
Explanation
FLI (Foreign LUN Import) is a feature built into ONTAP that allows users to import data from foreign array LUNs to NetApp LUNs in a simple and efficient manner. FLI supports four main types of migration workflows: online, offline, transition, and automated. FLI leverages FlexArray technology to discover the foreign RAID array LUNs and pull data from them. FLI can migrate data between heterogeneous storage arrays from EMC, Hitachi, HP, and other vendors to NetApp as supported by FlexArray configuration12.
XCP is a NetApp tool that provides fast and scalable data migration and data copy services for any NAS environment. XCP can copy data from any NFS or SMB/CIFS source to any NFS or SMB/CIFS destination, regardless of the vendor or protocol version. XCP can also preserve file attributes, permissions, ownership, and timestamps during the copyprocess. XCP can be used for file-level migrations, such as NFS and CIFS/SMB, which are not supported by FLI34.
References :- Migration types supported by Foreign LUN Import, Foreign LUN Import overview, XCP overview, Data Migration Tools Quick Reference
NEW QUESTION # 62
You setting up replication between two clusters.
In this scenario, which two components are required to set up the cluster peering? (Choose two.)
- A. An intercluster LIF on every node.
- B. DNS service on each cluster.
- C. An intercluster LIF on only the epsilon node.
- D. ICMP service between clusters.
Answer: A,D
NEW QUESTION # 63
You want to prepare your ONTAP cluster and your ESXI cluster to connect NFS datastores over a 10-GbE network using Jumbo frames. In this scenario, which three configurations would accomplish this task?
(Choose three.)
- A. Enable Jumbo frames with an MTU of 1500 for your ESXI hosts.
- B. Enable jumbo frames with an MTU of 9216 for your switches.
- C. Enable jumbo frames with an MTU of 9000 for your ESXi hosts.
- D. Enable Jumbo frames with an MTU of 1500 for your ONTAP cluster.
- E. Enable Jumbo frames with an MTU of 9000 for your ONTAP cluster.
Answer: B,C,E
Explanation:
Explanation
Jumbo frames are Ethernet frames with a payload greater than the standard maximum transmission unit (MTU) of 1500 bytes. Jumbo frames can improve network performance by reducing the overhead of packet headers and increasing the efficiency of data transfer. However, to use jumbo frames, all the devices in the network path must support the same MTU size. Therefore, to connect NFS datastores over a 10-GbE network using jumbo frames, you need to enable jumbo frames with an MTU of 9000 for your ESXi hosts and your ONTAP cluster, and enable jumbo frames with an MTU of 9216 for your switches. This will ensure that the network can handle the larger frames without fragmentation or dropping. Note that the MTU of 9216 for the switches is slightly higher than the MTU of 9000 for the hosts and the cluster, to account for the additional overhead of VLAN tags or other encapsulations. References :- NFS configuration for ESXi using VSC overview, NS0-162: NetApp Data Administrator ONTAP Flashcards, NetApp Exam NS0-162 Topic 10 Question 20 Discussion, Which three configurations would accomplish this task?, NS0-162 NetApp Certified Data Administrator, ONTAP Exam
NEW QUESTION # 64
You have two ONTAP clusters and are setting up a new SnapMirror SVM replication (SVM DR) relationship. Which two statements are true in this scenario? (Choose two.)
- A. The target SVM subtype must be dp-destination.
- B. The source SVM subtype must be default.
- C. The target SVM subtype must be sync-destination.
- D. The source SVM subtype must be sync-source.
Answer: A,C
NEW QUESTION # 65
After attempting to perform an ONTAP upgrade. It falls during the pre-check. In this scenario, what would cause this problem?
- A. encrypted volumes
- B. offline volume
- C. Idle SnapMirrors
- D. offline data LIF
Answer: C
NEW QUESTION # 66
Due to the increasing threat of ransomware, you must implement a secure and fast solution to recover files in your ONTAP cluster. The users should be able to recover their files from their Windows Desktop.
In this scenario, which two steps fulfill this requirement? (Choose two.)
- A. Ensure that the option to copy a FlexClone of each volume containing files is activated.
- B. Ensure that the option to show previous versions on the SVM Is activated.
- C. Ensure that there is a Snapshot copy schedule for every volume containing files.
- D. Ensure that the option to show previous versions on each share is activated.
Answer: A,C
NEW QUESTION # 67
Which two storage efficiencies are enabled by default on NetApp AFF systems? (Choose two.)
- A. postprocess zero block detection
- B. Inline compression
- C. postprocess compaction
- D. Inline deduplication
Answer: A,D
NEW QUESTION # 68
You want to configure Active Directory domain controller access for NetApp ONTAP cluster administration. In this scenario, which two actions would accomplish this task? (Choose two.)
- A. Configure an authentication tunnel through an admin SVM.
- B. Configure an authentication tunnel through an existing CIFS SVM.
- C. Use the vservar active-directory create command to create a computer account on the domain for a non-CIFS SVM.
- D. Use the vserver active-directory create command to create a computer account on the domain for a CIFS SVM.
Answer: B,C
Explanation:
https://docs.netapp.com/ontap-9/index.jsp?topic=%2Fcom.netapp.doc.pow-adm-auth-rbac%2FGUID-BC7B1934-DDE6-4AFB-A319-6C85D1ADACB6.html Configuring an authentication tunnel If you have already configured a CIFS server for a data SVM, you can use the security login domain-tunnel create command to configure the SVM as a gateway, or tunnel, for AD access to the cluster.
Creating an SVM computer account on the domain
If you have not configured a CIFS server for a data SVM, you can use the vserver active-directory create command to create a computer account for the SVM on the domain.
NEW QUESTION # 69
You are performing an ONTAP upgrade with an intercluster data protection SnapMirror relationship in this scenario, which two steps must be performed before an NDU? (Choose two.)
- A. The destination cluster must be upgraded first.
- B. SnapMirror operations must be broken.
- C. SnapMirror operations must be suspended.
- D. The source cluster must be upgraded first.
Answer: A,C
NEW QUESTION # 70
You are the administrator of your company's ONTAP 9.7 systems. You have an AFF A220 in your main data center and a FAS2720 at a second data center on the same campus. You must ensure the highest possible rate of data security and availability with all snapshots.
In this scenario, which ONTAP solution do you implement?
- A. a SnapMirror Synchronous relationship between AFF and FAS
- B. a SnapMirror relationship with an update interval of one minute
- C. an SVM-DR relationship with identity preserve disabled for your SVMs
- D. an SVM-DR relationship with identity preserve enabled for your SVMS
Answer: D
NEW QUESTION # 71
You want to enable the Internal ONTAP engine that quickly Identifies the file and directory differences between two Snapshot copies. In this scenario, which feature would accomplish this task?
- A. SnapCenter
- B. SnapVault
- C. SnapDIff
- D. SnapLock
Answer: A
NEW QUESTION # 72
......
Use Real NS0-162 Dumps - 100% Free NS0-162 Exam Dumps: https://www.real4prep.com/NS0-162-exam.html
Realistic Verified NS0-162 exam dumps Q&As - NS0-162 Free Update: https://drive.google.com/open?id=1AR-X9857QaO-K2iYgtX4uzEXe96DsPd0